FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/24 Design: With precision ground point. The 3-surface shank prevents spinning in the drill chuck and therefore always ensures optimum torque transmission. Application: Suitable for mobile use on hand drills. Suitable for dry machining in steel materials. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 30 20 10 15 12 – 25 20 – 80 50 75 – – – – 1059 ∅ h8 mm Spiral length mm Total length mm STEEL < 700 N/mm2 f mm/rev PU 1059 Order No. € 1* 6 26 0.02 10 2.03 …0100 1.5* 9 32 0.02 10 2.26 …0150 1.6* 10 34 0.03 10 2.30 …0160 2* 12 38 0.03 10 2.30 …0200 2.5* 14 43 0.03 10 2.62 …0250 3* 16 46 0.03 10 2.46 …0300 3,2* 18 49 0.03 10 3.53 …0320 3.3* 18 49 0.03 10 3.10 …0330 3.5* 20 52 0.03 10 3.14 …0350 4 22 55 0.03 10 3.98 …0400 4.1 22 55 0.05 10 4.26 …0410 4.2 22 55 0.05 10 3.98 …0420 4.5 24 58 0.05 10 4.14 …0450 5 26 62 0.05 10 4.14 …0500 5.1 26 62 0.05 10 4.57 …0510 5.2 26 62 0.05 10 4.57 …0520 5.5 28 66 0.05 10 4.57 …0550 6 28 66 0.05 10 5.00 …0600 6.5 31 70 0.07 10 5.30 …0650 6.8 34 74 0.07 10 5.60 …0680 7 34 74 0.07 10 5.75 …0700 7.5 34 74 0.07 10 6.00 …0750 ​ (W100) ∅ h8 mm Spiral length mm Total length mm STEEL < 700 N/mm2 f mm/rev PU 1059 Order No. € 8 37 79 0.07 5 6.75 …0800 8.5 37 79 0.07 5 7.05 …0850 9 40 84 0.1 5 7.90 …0900 9.5 40 84 0.1 5 8.25 …0950 10 43 89 0.1 5 8.80 …1000 10.2 43 89 0.1 5 9.10 …1020 10.5 43 89 0.1 5 9.40 …1050 11 47 95 0.1 5 10.60 …1100 11.5 47 95 0.1 5 11.45 …1150 12 51 102 0.15 5 14.70 …1200 12.5 51 102 0.15 5 15.60 …1250 13 51 102 0.15 5 15.85 …1300 13.5 54 107 0.15 1 18.05 …1350 14 54 107 0.15 1 18.75 …1400 14.5 56 111 0.15 1 21.00 …1450 15 56 111 0.15 1 21.80 …1500 15.5 58 115 0.15 1 23.30 …1550 16 58 115 0.15 1 24.20 …1600 17 60 119 0.15 1 52.70 …1700 18 62 123 0.15 1 53.30 …1800 19 64 127 0.15 1 56.60 …1900 20 66 131 0.15 1 57.80 …2000 ​ (W100) Gold Gold Short drill, with three-edged shank * With cylinder shank, without three-edged surface area. HSS-E DIN 1897 N 130° Gold Set contents Ø h8 mm Quantity of drills piece Increasing mm 1059 Order No. € 1–10 19 0.5 110.00 …1319 1–10.5 24 0.5 + K.B.* 146.00 …1324 ​ (W100) Gold Short drill set, with three-edged shank * With intermediate sizes for tapped holes: 1 piece each.∅ 3.3; 4.2; 6.8; 10.2 mm. Gold Drills HSS/HSS-E 1.1

RkJQdWJsaXNoZXIy NTg4MTI=