FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/330 ∅ d1 = h10 mm Corner radius r mm Cutting length l2 mm Neck grinding l3 mm Neck ∅ d3 mm Total length l1 mm Shank ∅ d2 = h6 mm STEEL < 1000 N/mm2 fz mm 2491 Order No. € 10 0.5 19 32 9.5 72 10 0.038 55.10 …1005 10 1 19 32 9.5 72 10 0.038 55.10 …1010 10 1.5 19 32 9.5 72 10 0.038 55.10 …1015 10 2 19 32 9.5 72 10 0.038 55.10 …1020 12 0.5 22 38 11.5 83 12 0.046 80.20 …1205 12 1 22 38 11.5 83 12 0.046 80.20 …1210 12 1.5 22 38 11.5 83 12 0.046 80.20 …1215 12 2 22 38 11.5 83 12 0.046 80.20 …1220 16 1 26 44 15.5 92 16 0.054 129.00 …1610 16 2 26 44 15.5 92 16 0.054 129.00 …1620 20 1 32 54 19.5 104 20 0.066 198.50 …2010 20 1.5 32 54 19.5 104 20 0.066 198.50 …2015 20 2 32 54 19.5 104 20 0.066 198.50 …2020 ​ (W221) Fire Continued Slot drill, with corner radius Design: With centre cut, suitable for drilling. These tools should only be used in shrink-fit or hydro-expansion chucks. Application: Suitable for plunge cutting, slot cutting and contour milling with corner radius to avoid notching effects on the workpiece – less corner wear during plunge cutting and slot milling. Suitable for HSC machining. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 115 92 74 80 64 51 120 96 40 150 120 80 – 30 – – 2492 ∅ d1 = h10 mm Corner radius r mm Cutting length l2 mm Neck grinding l3 mm Neck ∅ d3 mm Total length l1 mm Shank ∅ d2 = h6 mm STEEL < 1000 N/mm2 fz mm 2492 Order No. € 6 0.5 13 21 5.7 57 6 0.024 36.80 …0605 6 1 13 21 5.7 57 6 0.024 36.80 …0610 8 0.5 19 27 7.7 63 8 0.032 51.10 …0805 8 1 19 27 7.7 63 8 0.032 51.10 …0810 8 1.5 19 27 7.7 63 8 0.032 51.10 …0815 8 2 19 27 7.7 63 8 0.032 51.10 …0820 10 0.5 22 32 9.5 72 10 0.038 75.80 …1005 10 1 22 32 9.5 72 10 0.038 75.80 …1010 10 1.5 22 32 9.5 72 10 0.038 75.80 …1015 10 2 22 32 9.5 72 10 0.038 75.80 …1020 12 0.5 26 38 11.5 83 12 0.046 96.90 …1205 12 1 26 38 11.5 83 12 0.046 96.90 …1210 12 1.5 26 38 11.5 83 12 0.046 96.90 …1215 12 2 26 38 11.5 83 12 0.046 96.90 …1220 16 1 32 44 15.5 92 16 0.054 161.50 …1610 16 1.5 32 44 15.5 92 16 0.054 161.50 …1615 16 2 32 44 15.5 92 16 0.054 161.50 …1620 20 1 38 54 19.5 104 20 0.066 240.50 …2010 20 1.5 38 54 19.5 104 20 0.066 240.50 …2015 20 2 38 54 19.5 104 20 0.066 240.50 …2020 ​ (W221) Fire End mill, with corner radius Solid carbide N 4 DIN 6527 DIN 6535-HA 30° HSC Fire Solid carbide milling cutters 1.9

RkJQdWJsaXNoZXIy NTg4MTI=