Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/329 Design: With centre cut, suitable for drilling. Application: Can be used for MTC (Multi-Task-Cutting) on new generation lathing/milling machines (MTM). The fine cord toothing produces small chips which are easy to remove. This improves tool life and achieves a better surface finish. Particularly suitable for milling deep grooves. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – 225 – – – – 225 – – – – – – 205 – – 2412 ∅ d1 mm Corner radius r mm Cutting length l2 mm Neck grinding l3 mm Total length l1 mm Shank ∅ d2 = h6 mm Number of teeth STEEL < 1000 N/mm2 fz mm 2412 Order No. € 6 0.5 9 18 57 6 4 0.032 47.40 …0600 8 0.5 12 24 63 8 4 0.045 53.60 …0800 10 0.5 15 30 72 10 4 0.057 79.10 …1000 12 0.5 18 36 83 12 4 0.064 110.50 …1200 16 1 24 48 100 16 4 0.066 157.00 …1600 20 1 30 60 110 20 5 0.074 306.00 …2000 (W212) TiAlN Roughing end mill, MTC Solid carbide HR 4–5 DIN 6535-HB 45° MTC TiAlN Design: With centre cut, suitable for drilling. These tools should only be used in shrink-fit or hydro-expansion chucks. Application: Can be used for copy and slot milling as well as for universal machining with corner radius to avoid notching effects on the workpiece – less corner wear during slot milling. Suitable for HSC machining. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 115 92 74 80 64 51 120 96 40 150 120 80 – 30 – – 2491 ∅ d1 = h10 mm Corner radius r mm Cutting length l2 mm Neck grinding l3 mm Neck ∅ d3 mm Total length l1 mm Shank ∅ d2 = h6 mm STEEL < 1000 N/mm2 fz mm 2491 Order No. € 6 0.5 10 21 5.7 57 6 0.024 27.20 …0605 6 1 10 21 5.7 57 6 0.024 27.20 …0610 8 0.5 16 27 7.7 63 8 0.032 36.80 …0805 8 1 16 27 7.7 63 8 0.032 36.80 …0810 8 1.5 16 27 7.7 63 8 0.032 36.80 …0815 8 2 16 27 7.7 63 8 0.032 36.80 …0820 (W221) Fire Slot drill, with corner radius Solid carbide N 2 DIN 6527 DIN 6535-HA 30° HSC Fire Continued on next page Solid carbide milling cutters 1.9
RkJQdWJsaXNoZXIy NTg4MTI=