FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/320 Design: With centre cut, suitable for drilling. Internal cooling increases productivity with optimised chip removal. Application: Can be used for peripheral milling as well as for universal machining. Can also be used for trimming and finishing milling. Can be used for rough grinding, slot cutting and finishing milling. The irregular helical pitch results in particularly smooth running and thus very good surface on the workpiece. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 190 152 122 70 56 45 200 160 70 250 200 130 – – – – 2454 ∅ d1 = h10 mm Cutting length l2 mm Neck Ø mm Total length l1 mm Shank ∅ d2 = h6 mm STEEL < 1000 N/mm2 fz mm 2454 Order No. € 6 13 5.5 57 6 0.039 89.10 …0600 8 19 7.5 63 8 0.053 117.00 …0800 10 22 9.2 72 10 0.065 173.50 …1000 12 26 11.2 83 12 0.079 223.00 …1200 16 32 15 92 16 0.095 385.00 …1600 20 38 19 104 20 0.11 591.50 …2000 (W221) Fire End mill, with 40°/42° helical pitch and inner cooling Solid carbide NH 4 DIN 6527 DIN 6535-HB 40°/42° Fire Design: With centre cut, suitable for drilling. Precision balanced to < 1 gmm, smooth running and gentle on the spindle. Application: Can be used for peripheral milling as well as for universal machining. Can also be used for trimming and finishing milling. Can be used for rough grinding, slot cutting and finishing milling. The irregular helical pitch results in particularly smooth running and thus very good surface on the workpiece. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 410 300 – 160 120 – 220 190 85 800 560 – – 70 – – 2222 ∅ d1 = f9 mm Cutting length l2 mm Neck grinding l3 mm Neck Ø mm Total length l1 mm Corner chamfer 45° mm Shank ∅ d2 = h6 mm STEEL < 1000 N/mm2 fz mm 2222 Order No. € 4 11 15 3.8 58 0.08 6 0.026 27.00 …0400 5 13 18 4.8 58 0.1 6 0.033 27.00 …0500 6 13 20 5.7 58 0.12 6 0.039 27.00 …0600 8 19 26 7.6 64 0.16 8 0.052 35.00 …0800 10 22 30.5 9.5 73 0.2 10 0.065 47.00 …1000 12 26 36.5 11.4 84 0.24 12 0.078 65.00 …1200 14 26 36.5 13.3 84 0.28 14 0.091 90.00 …1400 16 32 42.5 15.2 93 0.32 16 0.104 110.00 …1600 18 32 42.5 17.1 93 0.36 18 0.117 166.00 …1800 20 38 52 19 105 0.4 20 0.13 172.00 …2000 (W218) AlTiN Plunge milling cutter, UNI, HAIMER MILL Solid carbide N 4 DIN 6535-HB 31°/33° 45° AlTiN O O G G O G Solid carbide milling cutters 1.9

RkJQdWJsaXNoZXIy NTg4MTI=