Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/319 Design: With centre cut, suitable for drilling. Application: Can be used for peripheral milling as well as for universal machining. Can also be used for trimming and finishing milling. Can be used for rough grinding, slot cutting and finishing milling. The irregular helical pitch results in particularly smooth running and thus very good surface on the workpiece. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 190 152 122 50 40 32 200 160 50 250 200 130 – 100 – – 2463 ∅ d1 = h10 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm STEEL < 1000 N/mm2 fz mm 2463 Order No. € 10 40 100 10 0.065 117.50 …1000 12 45 150 12 0.079 170.50 …1200 16 65 150 16 0.095 322.00 …1600 20 65 150 20 0.11 427.50 …2000 25 75 150 25 0.165 579.50 …2500 (W220) Fire End mill, with 35°/38° helical pitch Solid carbide N 4 DIN 6535-HA 35°/38° Fire Design: With centre cut, suitable for drilling. Application: Can be used for peripheral milling as well as for universal machining. For milling depths up to 2 x D. Can also be used for trimming and finishing milling. Can be used for rough grinding, slot cutting and finishing milling. The irregular from 36°/38° helical pitch results in particularly smooth running and thus very good surface on the workpiece. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 190 152 122 60 48 38 180 144 70 250 200 130 – – – – 2513 ∅ d1 = h10 mm Cutting length l2 mm Neck Ø mm Total length l1 mm Shank ∅ d2 = h6 mm STEEL < 1000 N/mm2 fz mm 2513 Order No. € 4 11 3.7 57 6 0.028 37.40 …0400 5 13 4.7 57 6 0.028 37.40 …0500 6 13 5.5 57 6 0.039 45.80 …0600 8 19 7.5 63 8 0.053 63.40 …0800 10 22 9.2 72 10 0.065 96.50 …1000 12 26 11.2 83 12 0.079 123.00 …1200 16 32 15 92 16 0.095 212.50 …1600 20 38 19 104 20 0.11 329.50 …2000 (W221) Fire End mill, with 36°/38° helical pitch Solid carbide NH 4 DIN 6527 DIN 6535-HA 36°/38° Fire O O G G G Solid carbide milling cutters 1.9
RkJQdWJsaXNoZXIy NTg4MTI=