Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/283 Design: Concave, relieved. Application: Can be used for milling semi-circular profiles and for rounding edges. Note: The cutters can be reground several times without the profile being changed. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 22 15 – 20 – – 18 20 – – 55 22 – – – – 2055 Radius r mm Tolerance mm ∅ d1 mm Width b mm Bore d2 = H7 mm Number of teeth STEEL < 700 N/mm2 fz mm 2055 Order No. € 1 ±0.05 50 6 16 14 0.08 93.70 …0001 2 ±0.05 50 9 16 14 0.08 93.70 …0004 3 ±0.08 63 12 22 12 0.1 99.60 …0007 4 ±0.08 63 16 22 12 0.1 106.50 …0010 5 ±0.08 63 20 22 12 0.1 142.00 …0013 6 ±0.08 80 24 27 12 0.12 164.50 …0016 8 ±0.12 80 32 27 12 0.12 199.50 …0019 10 ±0.12 100 36 32 12 0.14 285.50 …0022 (W204) bright Half-round router bit HSS DIN 138 bright Design: Straight fluted. Application: Usable for milling prism-shaped guides. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 24 15 – 14 – – 20 22 – – 60 24 – – – – 2058 ∅ d1 mm Angle α ° Width b mm Bore d2 = H7 mm Number of teeth STEEL < 700 N/mm2 fz mm 2058 Order No. € 50 45 8 16 22 0.03 84.20 …0001 63 45 10 22 24 0.035 101.00 …0004 80 45 12 27 26 0.04 120.50 …0007 100 45 18 32 28 0.045 209.00 …0010 50 60 10 16 18 0.03 88.60 …0013 63 60 14 22 20 0.035 106.00 …0016 80 60 18 27 22 0.04 127.00 …0019 100 60 25 32 24 0.045 215.50 …0022 50 90 14 16 16 0.03 93.00 …0025 63 90 20 22 18 0.035 111.00 …0028 80 90 22 27 20 0.04 133.00 …0031 100 90 32 32 24 0.045 222.50 …0034 (W204) bright Double equal-angle milling cutter HSS H DIN 847 DIN 138 bright End mills HSS-E/HSS-E PM 1.8
RkJQdWJsaXNoZXIy NTg4MTI=