FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/12 Design: With precision ground point and narrow cross blade. With a side clearance angle of 12°/30°. Application: Special drill for precise drill positioning. Used for centring and chamfering thread holes in one step. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 20 10 6 – – – 15 5 3 30 30 20 3 – – – 1150 ∅ h8 mm Slot length mm Total length mm STEEL < 700 N/mm2 f mm/rev 1150 Order No. € 6 20 140 0.09 32.00 …0600 8 25 140 0.1 35.40 …0800 10 25 170 0.13 45.60 …1000 12 30 170 0.16 57.10 …1200 ​ (W106) TiN NC spotting drill, with cylinder shank, length HSS Co5 DIN 1835-B 120° TiN _ Design: Special drill, with reinforced shank and high concentricity. ∅ tolerance: on spiral part 0/–0.004 mm. Application: For drilling small holes with high drilling accuracy. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 20 18 12 18 14 11 22 18 5 26 – – – – – – 1040 ∅ mm Spiral length I mm Total length mm Shank h8 mm STEEL < 700 N/mm2 f mm/rev PU 1040 Order No. € 0.1 0.5 25 1 0.006 10 ∆ 9.25 …0010 0.15 0.8 25 1 0.007 10 ∆ 9.05 …0015 0.2 1.5 25 1 0.009 10 ∆ 7.05 …0020 0.25 1.9 25 1 0.009 10 ∆ 6.40 …0025 0.3 1.9 25 1 0.011 10 ∆ 5.95 …0030 0.35 2.4 25 1 0.014 10 ∆ 5.35 …0035 0.4 3 25 1 0.014 10 ∆ 4.51 …0040 0.45 3 25 1 0.014 10 ∆ 5.05 …0045 0.5 3.4 25 1 0.014 10 ∆ 4.41 …0050 0.55 3.9 25 1 0.02 10 ∆ 4.60 …0055 0.6 3.9 25 1 0.02 10 ∆ 4.27 …0060 0.65 4.2 25 1 0.024 10 ∆ 4.95 …0065 0.7 4.8 25 1 0.024 10 ∆ 4.14 …0070 0.75 4.8 25 1 0.024 10 ∆ 4.51 …0075 0.8 5.3 25 1.5 0.024 10 ∆ 4.32 …0080 0.85 5.3 25 1.5 0.041 10 ∆ 4.60 …0085 0.9 6 25 1.5 0.041 10 ∆ 4.32 …0090 0.95 6 25 1.5 0.041 10 ∆ 4.76 …0095 1 6.8 25 1.5 0.041 10 ∆ 4.32 …0100 ​ (W100) bright Micro drill Further dimensions as well as left-hand cutting or in solid carbide available on request. ∆ Can only be supplied as a whole packaging unit. HSS Co5 DIN 1899-A N 118° 25–30° bright Drills HSS/HSS-E 1.1

RkJQdWJsaXNoZXIy NTg4MTI=