FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/247 Design: Closed, pre-slotted form with single sided spiral point, with spiral point form on both sides from No. 5. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 10 – – – – – 5 5 – 18 – 12 – – – – 1820 10 – – – – – 5 5 – 18 – 12 – – – – 1822 Thread inch Threads to 1 inch Outer Ø x height mm 1820 Order No. € UNC No. 1 64 16 x 5 50.30 …0001 UNC No. 2 56 16 x 5 40.40 …0003 UNC No. 3 48 16 x 5 54.60 …0005 UNC No. 4 40 16 x 5 32.30 …0007 UNC No. 5 40 20 x 5 32.80 …0009 UNC No. 6 32 20 x 7 28.40 …0011 UNC No. 8 32 20 x 7 27.10 …0013 UNC No. 10 24 20 x 7 27.10 …0015 UNC No. 12 24 20 x 7 32.40 …0017 UNC 1/4 20 20 x 7 26.00 …0019 UNC 5/16 18 25 x 9 29.40 …0021 UNC 3/8 16 30 x 11 35.10 …0023 UNC 7/16 14 30 x 11 36.40 …0025 UNC 1/2 13 38 x 14 44.10 …0027 UNC 9/16 12 38 x 14 48.80 …0029 UNC 5/8 11 45 x 18 58.30 …0031 UNC 3/4 10 45 x 18 58.30 …0033 UNC 7/8 9 55 x 22 94.50 …0035 UNC 1 8 55 x 22 94.50 …0037 ​ (W174) Thread inch Threads to 1 inch Outer Ø x height mm 1822 Order No. € UNF No. 10 32 20 x 7 27.30 …0015 UNF No. 12 28 20 x 7 31.40 …0017 UNF 1/4 28 20 x 7 26.00 …0019 UNF 5/16 24 25 x 9 29.40 …0021 UNF 3/8 24 30 x 11 35.10 …0023 UNF 7/16 20 30 x 11 35.10 …0025 UNF 1/2 20 38 x 10 44.10 …0027 UNF 5/8 18 45 x 14 58.30 …0031 UNF 3/4 16 45 x 14 58.30 …0033 UNF 7/8 14 55 x 16 86.10 …0035 UNF 1 12 55 x 16 88.70 …0037 ​ (W174) bright bright Die Further dimensions available on request. HSS EN 22568 60° Tol. 2A 1820 bright UNC coarse thread ANSI B1.1. 1822 bright UNF fine thread ANSI B1.1. 1822 bright UNF 1820 bright UNC Design: 30-piece cutting set with drilling and holding tools in steam-treated design against cold welding. In a sturdy steel case with carry handles and 2 locks. The tools are kept in various holders and are readily available. Application: For metric external and internal M3-M12 threads. The best possible handling is guaranteed due to the different sized die holder and tap wrench. Size Set content 1795 Order No. € M3–M12 7 Tap set, 3 piece, HSS-G DIN 352, M3; 4; 5; 6; 8; 10; 12 7 jobber drills, HSS-G, DIN 338 N, in the respective core drill dimensions Ø 2.5; 3.3; 4.2; 5.0; 6.8; 8.5; 10.2 mm 7 Die stocks HSS, DIN EN 22568, M3; 4; 5; 6; 8; 10; 12 5 die holders, DIN 225, 20 x 5; 20 x 7; 25 x 9; 30 x 11; 38 x 14 mm 2 adjustable tap wrenches, DIN 1814, size 1: 2 1 screwdriver for slotted screws, 4.5 mm 1 thread template, metric 217.50 …0225 ​ (W162) Thread cutting tool set M HSS HSS G DIN 352 DIN 338 EN 22568 60° Dies and holding tools 1.6

RkJQdWJsaXNoZXIy NTg4MTI=