All prices quoted are non-binding recommended prices. 1/246 Design: Closed, pre-slotted form, with spiral point form on both sides. Application: For steel casing pipe threads DIN 40430. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 10 – – – – – 5 5 – 18 – 12 – – – – 1825 Thread inch Threads to 1 inch Outer Ø x height mm 1825 Order No. € PG 7 20 38 x 10 61.80 …0001 PG 9 18 38 x 10 61.80 …0003 PG 11 18 45 x 14 77.90 …0005 PG 13.5 18 45 x 14 77.90 …0007 (W174) Thread inch Threads to 1 inch Outer Ø x height mm 1825 Order No. € PG 16 18 55 x 16 100.50 …0009 PG 21 16 65 x 18 142.00 …0011 PG 29 16 65 x 18 154.00 …0013 PG 36 16 90 x 22 308.50 …0015 (W174) bright bright Die PG HSS DIN 40434 80° bright Design: Closed, pre-slotted form with spiral point on one side. Application: For NPT conical american pipe thread ANSI B1.20.1 taper 1:16, for thread with sealant. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 10 – – – – – 5 5 – 18 – 12 – – – – 1828 Thread inch Threads to 1 inch Outer Ø x height mm 1828 Order No. € NPT 1/16 27 25 x 9 64.60 …0001 NPT 1/8 27 30 x 11 61.60 …0003 NPT 1/4 18 38 x 14 64.70 …0005 NPT 3/8 18 45 x 14 82.80 …0007 (W174) Thread inch Threads to 1 inch Outer Ø x height mm 1828 Order No. € NPT 1/2 14 45 x 18 82.80 …0009 NPT 3/4 14 55 x 22 137.00 …0011 NPT 1 11.5 65 x 25 175.50 …0013 (W174) bright bright Die NPT HSS 60° bright Cutting oil spray For all-around machining. Outstanding cooling property provides for the extension of tool life, excellent lubricity and a high surface quality. Reduces effort and makes high continuous load and higher cutting speed possible. Ideal for drilling, punching, milling, sawing, turning and lots more. Ç 9/137 Dies and holding tools 1.6
RkJQdWJsaXNoZXIy NTg4MTI=