FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/215 Application: For regular metric threads according to DIN 13. Note: Different core hole ∅ (refer to table). Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – – – – – – – – – – – 4 2 2 1717 Thread Gradient mm Total length mm Shank ∅ mm Square shank mm Core hole ∅ mm 1717 Order No. € M3 0.5 56 3.5 2.7 2.6 194.00 …0030 M4 0.7 63 4.5 3.4 3.4 184.00 …0040 M5 0.8 70 6 4.9 4.3 212.00 …0050 M6 1 80 6 4.9 5.1 257.50 …0060 M8 1.25 90 8 6.2 6.9 304.00 …0080 M10 1.5 100 10 8 8.6 375.00 …0100 M12 1.75 110 9 7 10.4 418.00 …0120 M16 2 110 16 12 14.1 492.50 …0160 ​ (W165) TiCN Through hole machine tap M Solid carbide ISO 2 6H H 60° 3,5–5 D ≤ 1,5xd TiCN Design: M3–M10 DIN 371 with reinforced shank. M12–M20 DIN 376 with overflow shank. Application: For regular metric threads according to DIN 13. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – – – – – – – 18 – – – – – – 1722 Thread Gradient mm Total length mm Shank ∅ mm Square shank mm Core hole ∅ mm 1722 Order No. € M3 0.5 56 3.5 2.7 2.5 11.75 …0030 M4 0.7 63 4.5 3.4 3.3 11.75 …0040 M5 0.8 70 6 4.9 4.2 12.05 …0050 M6 1 80 6 4.9 5 12.05 …0060 M8 1.25 90 8 6.2 6.8 14.15 …0080 M10 1.5 100 10 8 8.5 16.90 …0100 M12 1.75 110 9 7 10.2 24.30 …0120 M14 2 110 11 9 12 28.30 …0140 M16 2 110 12 9 14 33.50 …0160 M18 2.5 125 14 11 15.5 45.10 …0180 M20 2.5 140 16 12 17.5 49.10 …0200 ​ (W164) bright Through hole aluminium machine tap M HSS-E DIN 371 DIN 376 ISO 2 6H W 60° 4–5 B ≤ 3xd bright Hand taps and machine taps 1.5

RkJQdWJsaXNoZXIy NTg4MTI=