All prices quoted are non-binding recommended prices. 1/214 Application: Universal taps with a broad range of metric regulation thread according to DIN 13. Note: Tolerance zone 6HX: Addition "X" indicates a tolerance range outside the standard - especially suitable for oversized, high-strength and abrasive materials - with a longer service life. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 12 10 8 6 5 4 10 8 – 12 – – – – – – 1669 Thread Gradient mm Total length mm Shank ∅ mm Square shank mm Core hole ∅ mm 1669 Order No. € M3 0.5 112 3.5 2.7 2.5 41.10 …0030 M4 0.7 112 2.8 2.1 3.3 36.70 …0040 M5 0.8 125 3.5 2.7 4.2 36.70 …0050 M6 1 125 4.5 3.4 5 36.70 …0060 M8 1.25 140 6 4.9 6.8 37.60 …0080 M10 1.5 160 7 5.5 8.5 45.60 …0100 M12 1.75 180 9 7 10.2 52.50 …0120 M16 2 220 12 9 14 72.30 …0160 M20 2.5 280 16 12 17.5 108.00 …0200 (W163) TiN Blind hole machine tap, extra long, TANDEM M HSS-E N 6HX 60° 2–3 C 40° ≤ 3xd TiN Application: For regular metric threads according to DIN 13. Note: HSS-E PM has outstanding durability (greater edge stability, more wear-resistant) and a longer tool life. Advantages: Significantly higher process certainty through trusting in the process, up to 1/3 longer life and better surface finish for the thread. Tolerance zone 6HX: Addition "X" indicates a tolerance range outside the standard - especially suitable for oversized, high-strength and abrasive materials - with a longer service life. Different core hole ∅ (refer to table). Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – – – – – – – – – – – 6 – – 1716 Thread Gradient mm Total length mm Shank ∅ mm Square shank mm Core hole ∅ mm 1716 Order No. € M3 0.5 56 3.5 2.7 2.6 48.40 …0030 M4 0.7 63 4.5 3.4 3.4 42.70 …0040 M5 0.8 70 6 4.9 4.3 47.70 …0050 M6 1 80 6 4.9 5.1 61.00 …0060 M8 1.25 90 8 6.2 6.9 67.60 …0080 M10 1.5 100 10 8 8.6 87.60 …0100 M12 1.75 110 12 9 10.4 104.50 …0120 M16 2 110 16 12 14.1 141.00 …0160 (W165) TiCN Through hole machine tap M DIN 371 HSS-E PM 6HX H 60° 3,5–5 D ≤ 1,5xd TiCN Hand taps and machine taps 1.5
RkJQdWJsaXNoZXIy NTg4MTI=