All prices quoted are non-binding recommended prices. 1/210 Design: M5–M10 DIN 371 with reinforced shank. M12 DIN 376 with overflow shank. Application: For regular metric threads according to DIN 13. Note: HSS-E PM has outstanding durability (greater edge stability, more wear-resistant) and a longer tool life. Advantages: Significantly higher process certainty through trusting in the process, up to 1/3 longer life and better surface finish for the thread. Tolerance zone 6HX: Addition "X" indicates a tolerance range outside the standard - especially suitable for oversized, high-strength and abrasive materials - with a longer service life. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – 12 10 – – – 20 25 – – – – – – – – 1711 Thread Gradient mm Total length mm Shank ∅ mm Square shank mm Core hole ∅ mm 1711 Order No. € M5 0.8 70 6 4.9 4.2 60.20 …0050 M6 1 80 6 4.9 5 56.80 …0060 M8 1.25 90 8 6.2 6.8 68.50 …0080 M10 1.5 100 10 8 8.5 96.90 …0100 M12 1.75 110 9 7 10.2 89.40 …0120 (W165) TiCN Blind hole machine tap, INOX M HSS-E PM H DIN 371 DIN 376 6HX 60° 2–3 C ≤ 3xd TiCN Design: M3–M10 DIN 371 with reinforced shank. M12–M20 DIN 376 with overflow shank. Application: For regular metric threads according to DIN 13. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – 12 3 – – – – – – – – – – – – – 1712 – 25 6 – – – – – – – – – – – – – 1715 Thread Gradient mm Total length mm Shank ∅ mm Square shank mm Core hole ∅ mm 1712 1715 Order No. € € M3 0.5 56 3.5 2.7 2.5 12.60 51.80 …0030 M4 0.7 63 4.5 3.4 3.3 13.00 49.30 …0040 M5 0.8 70 6 4.9 4.2 13.45 53.50 …0050 M6 1 80 6 4.9 5 13.45 66.80 …0060 M8 1.25 90 8 6.2 6.8 14.25 67.60 …0080 M10 1.5 100 10 8 8.5 18.05 86.90 …0100 M12 1.75 110 9 7 10.2 25.10 103.00 …0120 M14 2 110 11 9 12 35.20 – …0140 M16 2 110 12 9 14 34.90 133.50 …0160 M18 2.5 125 14 11 15.5 49.80 – …0180 M20 2.5 140 16 12 17.5 51.50 229.00 …0200 (W164) (W165) bright TiAlN Blind hole machine tap, INOX M DIN 371 DIN 376 ISO 2 6H H 60° 2–3 C ≤ 3xd 1712 bright HSS-E. 1715 TiAlN HSS-E PM has outstanding durability (greater edge stability, more wear-resistant) and a longer tool life. Advantages: Significantly higher process certainty through trusting in the process, up to 1/3 longer life and better surface finish for the thread. 1715 TiAlN HSS-E PM 15° 1712 bright HSS-E 40° Hand taps and machine taps 1.5
RkJQdWJsaXNoZXIy NTg4MTI=