Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/209 Design: M2–M10 DIN 371 with reinforced shank. M12–M24 DIN 376 with overflow shank. Application: For regular metric threads according to DIN 13. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – 10 – – – – – – – – – – – – – – 1705 – – 2 – – – – – – – – – – – – – 1709 Thread Gradient mm Total length mm Shank ∅ mm Square shank mm Core hole ∅ mm 1705 1709 Order No. € € M2 0.4 45 2.8 2.1 1.6 20.20 – …0020 M2.5 0.45 50 2.8 2.1 2.05 22.50 – …0025 M3 0.5 56 3.5 2.7 2.5 12.60 48.40 …0030 M4 0.7 63 4.5 3.4 3.3 12.60 48.40 …0040 M5 0.8 70 6 4.9 4.2 13.20 51.00 …0050 M6 1 80 6 4.9 5 13.20 64.30 …0060 M8 1.25 90 8 6.2 6.8 15.20 62.70 …0080 M10 1.5 100 10 8 8.5 18.45 80.20 …0100 M12 1.75 110 9 7 10.2 24.10 102.00 …0120 M14 2 110 11 9 12 30.50 172.00 …0140 M16 2 110 12 9 14 34.00 139.50 …0160 M20 2.5 140 16 12 17.5 50.00 222.00 …0200 M24 3 160 18 14.5 21.5 114.00 292.50 …0240 (W164) (W165) bright TiAlN Through hole machine tap, HIGH-STRENGTH M DIN 371 DIN 376 ISO 2 6H H 60° 4–5 B ≤ 3xd 1709 TiAlN HSS-E PM 1705 bright HSS-E Design: Guide thread partially exposed, M3-M10 DIN 371 with reinforced shank, M12-M20 DIN 376 with overflow shank. Application: For regular metric threads according to DIN 13. By partially dispensing with the guide thread, the torque decreases significantly and the distribution of the lubricant is improved. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – 10 – – – – – – – – – – – – – 1728 Thread Gradient mm Total length mm Shank ∅ mm Square shank mm Core hole ∅ mm 1728 Order No. € M3 0.5 56 3.5 2.7 2.5 26.70 …0030 M4 0.7 63 4.5 3.4 3.3 26.70 …0040 M5 0.8 70 6 4.9 4.2 24.60 …0050 M6 1 80 6 4.9 5 25.10 …0060 M8 1.25 90 8 6.2 6.8 28.00 …0080 M10 1.5 100 10 8 8.5 33.40 …0100 M12 1.75 110 9 7 10.2 41.50 …0120 M14 2 110 11 9 12 61.00 …0140 M16 2 110 12 9 14 59.40 …0160 M18 2.5 125 14 11 15.5 94.00 …0180 M20 2.5 140 16 12 17.5 91.00 …0200 (W164) bright Through hole machine tap, with exposed teeth M HSS-E H DIN 371 DIN 376 ISO 2 6H 60° 4–5 B ≤ 3xd bright Hand taps and machine taps 1.5
RkJQdWJsaXNoZXIy NTg4MTI=