All prices quoted are non-binding recommended prices. 1/158 Continued on next page Design: Axial and radial relief ground and CBN deep-ground. Also provided with cutting and clearance angles for the most common materials. Application: Suitable for universal chatter and burr-free drilling, countersinking and deburring work for countersunk screws DIN 963, DIN 964, DIN 965 and DIN 966 in one step. The excellent cutting properties and easy machining process result from the cone-shaped relief grinding on the coat and angle of rake. The countersink achieves the best results with the strongest feed and lowest cutting speed. Note: Sufficient supply of coolant is essential for uncoated versions. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] C C – – – – – – – C C C – – – – 1430 C C – – – – – – – C C C – – – – 1433 C C U C C C – – – – – – – – – – 1434 C C U U U U – – – C C C – – – – 1436 Nominal-∅ mm Smallest ∅ mm Total length mm Shank ∅ mm 1430 1433 1434 1436 Order No. € € € € 4.3 1.3 40 4 7.60 13.55 17.35 11.60 …0430 5 1.5 40 4 7.60 13.55 17.35 11.60 …0500 5.3 1.5 40 4 10.70 15.85 16.55 11.60 …0530 5.8 1.5 45 5 10.70 15.85 – – …0580 6 1.5 45 5 8.50 13.55 16.55 12.25 …0600 6.3 1.5 45 5 8.50 13.55 16.70 10.70 …0630 7 1.8 50 6 11.95 14.60 – – …0700 7.3 1.8 50 6 9.25 14.70 – – …0730 8 2 50 6 9.25 14.70 18.00 12.25 …0800 8.3 2 50 6 9.25 14.70 18.10 11.55 …0830 9.4 2.2 50 6 11.95 16.35 – – …0940 10 2.5 50 6 9.85 16.35 19.95 16.05 …1000 10.4 2.5 50 6 9.85 16.35 21.00 11.85 …1040 11.5 2.8 56 8 11.20 18.90 23.10 16.05 …1150 12.4 2.8 56 8 11.20 18.90 24.50 13.80 …1240 13.4 2.9 56 8 14.05 21.80 – – …1340 15 3.2 60 10 14.05 21.80 26.60 15.45 …1500 16.5 3.2 60 10 14.05 23.50 29.00 15.45 …1650 19 3.5 63 10 19.60 29.80 36.50 22.90 …1900 20.5 3.5 63 10 19.60 31.20 38.50 20.80 …2050 23 3.8 67 10 28.50 41.50 50.70 31.70 …2300 25 3.8 67 10 28.50 41.50 51.10 28.60 …2500 28 4 71 12 31.60 52.40 64.10 33.50 …2800 30 4.2 71 12 35.40 52.40 – – …3000 31 4.2 71 12 35.40 52.40 64.70 37.70 …3100 40 5 80 15 61.80 89.70 90.00 63.60 …4000 (W134) (W134) (W134) (W134) bright TiN TiAlN bright Countersink and deburring countersink, 90°, with cylindrical shank DIN 335-C 3 90° 1436 bright HSS Co5 1434 TiAlN HSS 1433 TiN HSS 1430 bright HSS Countersinks 1.4
RkJQdWJsaXNoZXIy NTg4MTI=