Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/157 Design: Particularly good cutting properties thanks to 3 unequally split convex cutting edges. Reduction of feed force and chattering on the sinking surface due to reduced axial and radial forces. Application: Universal countersinks and deburring countersinks. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 41 32 14 14 14 16 25 22 12 55 45 50 – 7 – – 1392 41 32 14 14 16 11 25 22 12 55 45 50 – 7 – – 1393 Nominal-∅ mm Smallest ∅ mm Total length mm Shank ∅ mm 1392 1393 Order No. € € 6.3 1.5 45 5 22.60 24.20 …0630 8 2 50 6 26.80 28.70 …0800 8.3 2 50 6 25.50 27.20 …0830 10 2.5 50 6 27.20 29.10 …1000 10.4 2.5 50 6 27.90 29.90 …1040 11.5 2.8 56 8 31.70 34.00 …1150 12.4 2.8 56 8 28.50 30.60 …1240 15 3.2 60 10 34.40 37.00 …1500 16.5 3.2 60 10 34.40 37.00 …1650 19 3.5 63 10 50.20 53.70 …1900 20.5 3.5 63 10 48.70 52.10 …2050 23 3.8 67 10 73.80 79.20 …2300 25 3.8 67 10 64.80 69.40 …2500 31 4.2 71 12 105.00 113.00 …3100 40 5 75 12 177.50 190.50 …4000 (W117) (W117) TiAlN TiAlN Countersink and deburring countersink, SpyroTec, with convex cutting edges, 90° HSS-E DIN 335-C 3 90° 1392 TiAlN With cylinder shank. 1393 TiAlN With 3 surface shank. 1393 TiAlN 1392 TiAlN Set content mm 1392 1393 Order No. € € 6.3; 10.4; 16.5; 20.5; 25 198.50 212.50 …1895 6.3; 8.3; 10.4; 12.4; 16.5; 20.5 188.00 201.50 …1899 (W117) (W117) TiAlN TiAlN Countersink and deburring countersink set, SpyroTec, with convex cutting edges, 90° 1392 TiAlN With cylinder shank. 1393 TiAlN With 3 surface shank. 1393 TiAlN 1392 TiAlN Countersinks 1.4
RkJQdWJsaXNoZXIy NTg4MTI=