FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 8/54 CO SGP CURVE STEELOX Design: With aluminium oxide layers (CO) and grinding-activated, cooling coating, resin-bonded, high strength with fibreglass discs attached. High stock removal rate and long service life. Flap disc is covered with layers on both the grinding side and rear and around the radius. Manufactured without details of content for iron, sulphur or chlorine filling agents. Standard bore 22.23 mm. Application: For achieving fine surfaces. Suitable for fillet weld machining, weld seam machining and for chamfering and deburring. Steel V INOX C Grit 60 60 ​ For fillet seam width mm 5 8 ​ 8320 12200 min-1 ∅ 125 mm € 12.45 12.85 10 (W848) Order No. …0060 …0061 PU POLIFAN flap disc, ceramic grain, CURVE Fe + Cl + S ≤ 0,1 % 967A Design: With ceramic grit in resin-bonded, high strength with curved fibreglass discs attached. The individual grains of the ceramic Cubitron™ II abrasives are small, precisely-shaped triangles, perpendicular in arrangement, and uniform in size. Tough grinding with highest removal rate, with up to 30% faster removal. Grinding-activated additives prevent clogging and make for cooler grinding. Standard bore 22.23 mm. Application: Ideal for high removal rates with very good surface quality. Steel C INOX C Non-ferrous metal C Grit 40+ 60+ 80+ ​ 8291 ∅ 115 mm € 6.65 6.65 6.65 10 (W812) 8309 ∅ 125 mm € 6.90 – – 10 (W812) Order No. …0040 …0060 …0080 PU Flap disc Cubitron™ II LONGLIFE C-TRIM Design: With zirconia alumina layers (ZA), with straight plastic plate. The disc is self-trimming, allowing the disc to be fully utilised. Long-lasting aggressive removal performance with very long tool life. Manufactured without details of content for iron, sulphur or chlorine filling agents. Standard bore 22.23 mm. Application: Suitable for edge grinding and weld seam machining. Optimised for use on powerful angle grinders. Note: High edge stability due to compacted linen at the edge of the disc. Steel C INOX C Grit 40 60 ​ 8357 12250 min-1 ∅ 125 mm € 4.56 4.56 10 (W876) Order No. …0040 …0060 PU Flap disc for steel and stainless steel machining Fe + Cl + S ≤ 0,1 % ​ ​ ​ ​ ​ Flap discs 8

RkJQdWJsaXNoZXIy NTg4MTI=