Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 8/53 CO-FREEZE SGP STRONG INOX Design: With aluminium oxide layers (CO) and grinding-activated, cooling coating, resin-bonded, high strength with the curved fibreglass discs attached. With ultracool grinding for poor heat conducting materials. The long, compactly arranged layers ensure constant grinding aggression until the last abrasive grain is reached, thus offering outstanding service life. Manufactured without details of content for iron, sulphur or chlorine filling agents. Standard bore 22.23 mm. Application: Suitable for edge grinding and weld seam working. Note: No discolouration occurs so no post-processing required. INOX C Metal, high temperature resistance V Grit 36 50 8311 12200 min-1 ∅ 125 mm € 13.20 13.20 10 (W848) Order No. …0036 …0050 PU POLIFAN flap disc, ceramic grain STRONG Fe + Cl + S ≤ 0,1 % Z SGP STRONG STEEL Design: With zirconia alumina layers (Z), consistent tough design, resin-bonded, high strength with curved fibreglass discs attached. The long, compactly arranged layers ensure constant grinding aggression until the last abrasive grain is reached, thus offering outstanding service life. Standard bore 22.23 mm. Application: Suitable for weld seam machining and for chamfering and deburring. Steel C Grit 36 50 8314 13300 min-1 ∅ 115 mm € 11.60 11.60 10 (W848) 8315 12200 min-1 ∅ 125 mm € 11.95 11.95 10 (W848) Order No. …0036 …0050 PU POLIFAN flap disc, zirconia alumina STRONG Z SGP CURVE STEELOX Design: With zirconia alumina layers (Z), resin-bonded, high strength with fibreglass discs attached. High stock removal rate and long service life. Flap disc is covered with layers on both the grinding side and rear and around the radius. Manufactured without details of content for iron, sulphur or chlorine filling agents. Standard bore 22.23 mm. Application: Suitable for fillet weld machining, weld seam machining and for chamfering and deburring. Steel C INOX V Grit 40 40 For fillet seam width mm 5 8 8317 13300 min-1 ∅ 115 mm € 10.70 11.20 10 (W848) 8318 12200 min-1 ∅ 125 mm € 10.80 11.30 10 (W848) Order No. …0040 …0041 PU POLIFAN flap disc, zirconia alumina CURVE Fe + Cl + S ≤ 0,1 % Flap discs 8
RkJQdWJsaXNoZXIy NTg4MTI=