Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/139 Design: Made of special steel tool, induction hardened and ground, conical shape. Five-edged, shape with square angling for attachment to the metal holder. Supplied in plastic sleeve. Application: For cleaning nozzles. Set content 1513 Order No. € 11 Reamers ∅ 0.6; 0.65; 0.7; 0.75; 0.8; 0.9; 1.0; 1.1; 1.3; 1.5; 1.7; 1.9 mm 2 nickel-plated metal holders 33.00 …0050 (W527) Jet reamer set Design: Short point and uneven tooth pitch. This achieves clean and exact drilling. With cylinder shank. Tolerance h9. Application: Only for reaming through holes. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 10 8 8 4 2 4 6 5 4 20 18 – – – – – 1531 12 10 10 – – – 12 10 – – – – – – – – 1535 Nominal-∅ mm Cutting edge length mm Total length mm Shank ∅ h9 mm 1531 1535 Order No. € € 1* 5.5 34 1 21.40 – …0100 1.2* 7.5 38 1.2 21.00 – …0120 1.4* 8 40 1.4 19.55 – …0140 1.5* 8 40 1.5 16.65 – …0150 1.6* 9 43 1.6 18.35 – …0160 1.8* 10 46 1.8 18.35 – …0180 2* 11 49 2 15.65 – …0200 2.2* 12 53 2.2 19.45 – …0220 2.5* 14 57 2.5 15.65 – …0250 2.8* 15 61 2.8 20.20 – …0280 3* 15 61 3 13.90 43.10 …0300 3,2* 16 65 3.2 19.15 – …0320 3.5* 18 70 3.5 16.35 – …0350 4 19 75 4 15.65 43.60 …0400 4.5 21 80 4.5 16.35 – …0450 5 23 86 5 16.65 42.10 …0500 5.5 26 93 5.6 19.00 – …0550 6 26 93 5.6 16.90 45.30 …0600 (W140) (W141) Nominal-∅ mm Cutting edge length mm Total length mm Shank ∅ h9 mm 1531 1535 Order No. € € 6.5 28 101 6.3 20.00 – …0650 7 31 109 7.1 20.00 54.80 …0700 7.5 31 109 7.1 22.30 – …0750 8 33 117 8 20.70 56.10 …0800 8.5 33 117 8 26.20 – …0850 9 36 125 9 26.20 66.10 …0900 9.5 36 125 9 26.30 – …0950 10 38 133 10 24.50 66.30 …1000 11 41 142 10 36.00 – …1100 12 44 151 10 37.40 96.10 …1200 13 44 151 10 41.70 – …1300 14 47 160 12.5 43.10 112.00 …1400 15 50 162 12.5 44.40 – …1500 16 52 170 12.5 46.60 121.50 …1600 17 54 175 14 54.30 – …1700 18 56 182 14 55.80 147.00 …1800 19 58 189 16 65.70 – …1900 20 60 195 16 60.60 165.00 …2000 (W140) (W141) bright TiN bright TiN Machine reamer * Form B. HSS-E DIN 212-1/2 H7 ≈ 7° 1535 TiN 1531 bright Design: Taper 1:30. With morse taper shank. Application: For shell reamers Order No. 1517. Scope of delivery: Withdrawal nut, carrier ring and disc spring DIN 6888. Nominal-∅ mm Total length mm For DIN 219 mm MT 1520 Order No. € 13 250 25–30 3 138.00 …0013 16 261 31–35 3 151.00 …0016 19 298 36–42 4 181.00 …0019 22 312 44–50 4 225.00 …0022 (W140) Shell holder DIN 217 Reamers 1.3
RkJQdWJsaXNoZXIy NTg4MTI=