All prices quoted are non-binding recommended prices. 7/20 Design: Simple trimming spiral with galvanised twisting wire and corundum trim, particularly flexible. Overall length 125 mm. Application: For cleaning and polishing nozzles and small bores as well as for deburring bores and O-ring grooves. Note: In mechanical use, the maximum speed must be observed. The brush must be clamped at least 10 mm deep and inserted into the workpiece before starting work. Run clockwise. Steel C INOX C Cast C Aluminium C Non-ferrous metal, soft C Brush ∅ mm Shank ∅ mm max. rpm min-1 7949 Order No. € 3.2 1.5 800 13.90 …0032 4.2 2.2 1000 13.20 …0042 4.8 2.2 1000 13.05 …0048 5.5 2.2 1000 12.55 …0055 6.6 2.5 1000 11.75 …0066 8.2 3.2 2000 12.10 …0082 9.8 3.2 2000 12.25 …0098 11.5 3.7 2000 12.55 …0115 (W870) Brush ∅ mm Shank ∅ mm max. rpm min-1 7967 Order No. € 6 3 1500 9.20 …0060 8 3 1500 8.95 …0080 10 3.7 2000 7.50 …0100 13 3.7 2000 7.60 …0130 16 5.2 2000 7.80 …0160 20 5.7 2000 8.15 …0200 22 5.7 2000 8.35 …0220 25 5.7 2000 8.50 …0250 (W870) Micro-pipe brush, abrasive 7949 Aluminium oxide (A 600/0.3), trimming length 25 mm. Ideal for finer, less aggressive work. 7967 Silicon carbide grain (SiC 120/0.6), trimming length 65 mm. Ideal for tough work. 7967 7949 Design: Very dense full trim made of grain-penetrated, particularly bend-resistant and abrasion-resistant polyamide threads. Bore with double keyway. Suitable for diameter head mount (DIN 6357) or combi cutter arbor holder (DIN 6358). Application: Suitable for use in machining centres, on throughfeed deburring systems and systems with planetary brush systems, as well as for robot use. For deburring and edge rounding on workpiece edges of flat surfaces, e.g. stamped, pressed and sintered parts, drilled and milled workpieces, etc. Suitable for wet and dry machining. Benefits: Time saving: Machining of the workpiece directly after the cutting process without reclamping the workpiece. Process reliability: High dimensional stability of the bristles and concentricity of the brush. Reproducible result: Release of new abrasive grains over the complete service life. Further lengths and shank ∅ on request. Suitable blade head adapters and combi cutter arbor holders can be found from Ç 3/12. Disc brush for CNC machines Steel C INOX C Cast C Aluminium C Brush ∅ mm Working length mm Hole mm max. rpm min-1 7954 7956 7958 Order No. K 80 K 120 K 180 € € € 50 35 16 3600 59.80 59.80 59.80 …0050 75 35 22 3600 75.90 75.90 75.90 …0075 100 35 22 3600 82.50 82.50 – …0100 125 40 27 3000 103.50 103.50 – …0125 150 40 32 2500 128.50 128.50 – …0150 (W870) (W870) (W870) Silicon carbide Steel C INOX C Carbide C Metal, high temperature resistance V Brush ∅ mm Working length mm Hole mm max. rpm min-1 7964 7966 Order No. K 80 K 120 € € 50 35 16 3600 68.70 68.70 …0050 75 35 22 3600 87.50 87.50 …0075 100 35 22 3600 95.10 95.10 …0100 125 40 27 3000 118.50 118.50 …0125 150 40 32 2500 144.00 144.00 …0150 (W870) (W870) Ceramic grit Micro-pipe brushes, disc brushes for CNC 7
RkJQdWJsaXNoZXIy NTg4MTI=