FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 7/19 INOX C Aluminium C Non-ferrous metal C Brush ∅ mm Working length mm Wire thickness mm Total length mm max. rpm min-1 7047 7994 Order No. € € 19 28 0.35 72 20000 – 23.30 …0019 20 29 0.26 73 20000 20.30 – …0020 22 28 0.35 72 20000 – 24.50 …0022 23 29 0.26 73 20000 21.10 – …0023 29 28 0.35 72 20000 – 28.60 …0029 ​ (W566) (W872) Stainless steel wire 7994 Plastic-coated housing to protect the workpiece from extraneous rust. 7994 7047 Design: With 6-mm shank. Application: For use in drills and high-speed electrical and compressed air tools. For aggressive use in heavy cleaning work on hard-to-reach areas and interior surfaces. For the removal of paint, burrs, cinder, rust, scale, etc. End brush, knotted Design: With 6-mm shank. Application: For use in drills and high-speed electrical and compressed air tools. Mainly used for work on inside corners. For the removal of paint, burrs, cinder, rust, scale, etc. Brush ∅ mm Working length mm Wire thickness mm max. rpm min-1 7136 7137 Order No. Steel V2A € € 10 26 0.25 15000 9.35 10.65 …0005 10 25 0.35 15000 9.30 10.30 …0010 10 25 0.50 15000 9.05 10.15 …0015 ​ (W566) (W566) End brush, knotted, narrow Steel C Cast C Brush ∅ mm Working length mm Wire thickness mm Total length mm max. rpm min-1 7045 7993 Order No. € € 19 28 0.35 72 20000 – 15.90 …0019 20 29 0.35 73 20000 13.80 – …0020 22 28 0.35 72 20000 – 16.45 …0022 23 29 0.35 73 20000 14.35 – …0023 29 28 0.35 72 20000 – 20.80 …0029 ​ (W566) (W872) Steel wire 7993 7045 Design: Simple trimming spiral with galvanised twisting wire, aggressive design. Trim 25 mm, overall length 90 mm. Shank ∅ 3.8 mm. Application: For descaling, cleaning and deburring bores, cross cuts and grooves as well as for cleaning internal threads. Note: In mechanical use, the maximum speed must be observed. The brush must be clamped at least 10 mm deep and inserted into the workpiece before starting work. Run clockwise. 7968 7969 Steel C INOX C Cast C Aluminium C Non-ferrous metal C Wood C Brush ∅ mm Wire thickness mm max. rpm min-1 7968 7969 Order No. Steel V2A € € 8 0.12 3500 8.65 – …0080 10 0.12 3500 7.05 10.05 …0100 13 0.12 3500 5.85 9.40 …0130 16 0.12 3000 6.15 9.60 …0160 20 0.2 3000 6.40 9.95 …0200 25 0.2 3000 6.50 9.95 …0250 ​ (W870) (W870) Micro-pipe brush End brushes, micro-pipe brushes 7

RkJQdWJsaXNoZXIy NTg4MTI=