FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 6/349 Design: Self-centring Extrac drills ensure accurate conical bore, analogous to the pitch angle of the Schröder extractor. Dimensions mm 1858 Order No. € 4 x 58 12.25 …0040 5 x 63 13.25 …0050 5.5 x 68 14.50 …0055 7.5 x 80 16.15 …0075 10 x 88.5 16.95 …0100 ​ (W177) HSS drill for screw extractor Design: High-quality screw extractor Hi-Trac with special coating TP, heat-treated, 54-56 HRC, with rolled thread and fine left twist. The shaft is sharpened, with square for actuation with a tap spanner or tool holder. The properties have been considerably improved and the application facilitated by the new geometry. Lower loosening torque due to new cross-section geometry. Less drilling depth due to optimised thread length. More safety for the user and the component as well as a wider range of applications and time savings. Application: Application: For removing broken screws with a right thread. Drill a central hole in the piece to be removed using the recommended size of jobber drill, insert the screw extractor and turn evenly (not with a jerk) to the left to loosen the residual piece. for screws Size Jobber drill ∅ mm d1 d2 mm Square mm Total length mm 1859 Order No. € M4 1 1.8 1.8– 2 2.6 50 3.05 …0001 M5–M7 2 3.2 3 – 3.5 3.7 55 3.13 …0002 M8–M11 3 4.5 4 – 5 4.8 60 3.63 …0003 M12–M14 4 6.5 6 – 7 7 65 5.55 …0004 M16–M20 5 8.5 7.5–11 9 69 6.30 …0005 M20–M24 6 12 10 –15 12 77 10.05 …0006 ​ (W177) Screw extractor Hi-Trac TP Design: Supplied in plastic cassette. for screws Set content 1859 Order No. € M4–M20 1–5 22.90 …1005 M4–M24 1–6 30.90 …1000 ​ (W177) Screw extractor set Hi-Trac TP Screw extractors 6

RkJQdWJsaXNoZXIy NTg4MTI=