All prices quoted are non-binding recommended prices. 6/348 Design: Made of tempered special steel, with hexagonal nut for tightening the hardened chisel cutter. Application: For splitting inextricably fixed or overly tightened nuts to grade 6, without damaging the thread. Note: Dull, jagged or broken chisel must be replaced immediately. Model for nut size 6934 Order No. € 55-0 SW 4–10 (M2–M6) 57.60 …0010 55-1 SW 10–18 (M6–M12) 69.20 …0018 55-2 SW 19–27 (M12–M18) 75.00 …0027 (W562) Nut splitters, mechanical Design: Made of hardened and tempered special steel, with hexagon nut for tightening the hardened chisel cutter as well as counterholder with spanner surface and pressure spindle. Application: For blasting non-detachable or over-tightened nuts of quality grades 5; 6; 8 and 10 without damaging the thread. Can also be used in confined areas due to the double cranking action. The hydraulic system minimizes effort. Note: Dull, jagged or broken chisel must be replaced immediately. Model for stainless steel for nut size 6935 Order No. € 56-1 – SW 7–22 (M4–M14) 184.50 …0022 56-2 – SW 22–36 (M14–M24) 341.50 …0036 56-3 up to grade 10 SW 27–46 (M18–M30) 498.50 …0046 (W562) Nut splitters, hydraulic 6935 0022 6935 0036 6935 0046 Design: Made of chrome-vanadium steel, annealed, with rolled thread and fine left twist. The shaft is sharpened, with square for actuation with a tap spanner or tool holder. Application: Application: For removing broken screws with a right thread. Drill a central hole in the piece to be removed using the recommended size of jobber drill, insert the screw extractor and turn evenly (not with a jerk) to the left to loosen the residual piece. Size for screws Jobber drill ∅ mm Square mm Total length mm 1855 Order No. € 1 M4 1.8–2 2.7 50 1.78 …0010 2 M6–M7 3–3.5 3.8 57 1.82 …0020 3 M8–M10 4–5 4.9 64 2.33 …0030 4 M12–M14 6–7 7 71 2.83 …0040 5 M14–M18 8–9 9 79 3.60 …0050 6 M18–M24 12 12 85 5.30 …0060 7 M24–M33 15–16 14.5 92 8.50 …0070 8 M33–M45 20 18 100 12.70 …0080 (W176) Screw extractors Design: Supplied in plastic cassette. Set content for screws 1855 Order No. € 1–5 M4–M20 14.05 …9005 1–6 M4–M24 18.60 …9010 (W176) Screw extractor set Nut splitters, screw extractors 6
RkJQdWJsaXNoZXIy NTg4MTI=