Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/81 Design: Straight fluted. Chuck slippage is avoided by the 3-surface shank. Laser print of hole Ø and speed. The hole Ø can still be read with the tool rotating. Application: For burr-free drilling and reaming of sheets, pipes and profiles up to 6 mm materials thickness. Deburring up to 1.5 mm material thickness. Works without burrs and chatter marks and can be used in hand drills and box column drills. No punch marking required. Note: To increase the service life, we recommend the use of drilling paste Order No.: 1312 0005 Ç 1/84. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] C U – U – – – – – C C C – – – – 1315 C C U U – – – – – C C C – – – – 1312 C C C C C C U U – U U U – – – – 1313 Diameter of drill steps mm Step length mm Total length mm Shank h8 mm 1315 1312 1313 Order No. € € € 4; 5; 6; 7; 8; 9; 10; 11; 12 5 80 6 22.40 28.90 30.60 …0010 4; 6; 8; 10; 12; 14; 16; 18; 20 4 67 8 26.20 33.50 35.60 …0020 12; 13; 14; 15; 16; 17; 18; 19; 20 4 76 9 36.10 45.10 47.80 …0023 20; 21; 22; 23; 24; 25; 26; 27; 28; 29; 30 4 88 12 53.90 69.00 73.20 …0026 6; 8; 10; 12; 14; 16; 18; 20; 22; 24; 26; 28; 30 4 98 10 44.20 56.80 60.10 …0030 30; 31; 32; 33; 34; 35; 36; 37; 38; 39; 40 4 98 13 113.50 145.00 154.00 …0033 40; 41; 42; 43; 44; 45; 46; 47; 48; 49; 50 4 107 13 144.50 185.00 196.00 …0036 50; 51; 52; 53; 54; 55; 56; 57; 58; 59; 60 4 120 13 207.50 266.00 282.00 …0039 For PG core hole 12.5 (PG7); 15.2 (PG9); 18.6 (PG11); 20.4 (PG13.5); 22.5 (PG16); 28.3 (PG21); 33,0 (–); 37,0 (PG29) 4 92 12 71.60 96.60 111.00 …0040 For PG core hole 12.5 (PG7); 15.2 (PG9); 18.6 (PG11); 20.4 (PG13.5);(PG16); (PG21); 30.5 (–) 4 85 12 57.20 73.40 84.40 …0050 For PG core hole 11.4 (PG7); 14 (PG9); 17.25 (PG11); 19 (PG13.5); 21.25 (PG16); 26.75 (PG21) 6 92 12 57.20 73.40 84.40 …0060 For general mechanical engineering 9; 12; 15; 18; 21; 24; 27; 30; 33; 36 3 86 12 57.80 75.70 80.30 …0070 (W124) (W124) (W124) bright TiN TiAlN Universal stepped drill HSS 1313 TiAlN 1312 TiN 1315 bright Set content mm 1318 1312 1313 Order No. € € € 4–12; 12–20; 20–30 115.00 134.50 142.50 …0200 4–12; 4–20; 6–30 113.50 134.50 141.50 …0100 (W124) (W124) (W124) bright TiN TiAlN Universal stepped drill set 1313 TiAlN 1312 TiN 1318 bright Drills HSS/HSS-E 1.1
RkJQdWJsaXNoZXIy NTg4MTI=