Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 5/99 Design: Measurement category CAT IV 600 V/CAT III 1000 V (with protective cap), CAT II 1000 V (without protective cap). Measuring tip mm Length mm 5585 Order No. € 2 1400 15.10 …9002 4 1400 21.00 …9004 (W514) Safety measuring line for digital measuring device multimeter 5585 9002 Design: Measuring points ∅ 4 mm. Measurement category CAT III 1000 V. Design Set content 5585 Order No. € 8-piece 2 safety measuring lines (silicone) 2 safety measuring tips (slim measuring tip) 2 safety claw grippers 2 safety crocodile clips 58.70 …9800 (W514) Safety measuring line set TA 3 for digital measuring device multimeter Illustration similar Design: Casing made of impact-resistant plastic. Resistance measurement with 200 mA test current for testing protective conductor connections (VDE 0413-4) with test lead zero adjustment. Measurement of insulation resistance with test voltages of 50 V–1000 V (VDE 0413-2). Model IT 101 IT 100 Low resistance 0.01 Ohm–40 Ohm 0.01 Ohm–60 Ohm Insulation resistance 50 kOhm–20 GOhm 300 kOhm–20 GOhm Resistance 0.01 Ohm–40 kOhm 0.1 Ohm–600 kOhm Voltage 0.1 V–600 V 0.1 V–600 V Measurement value memory 500 – Measuring procedure TRUE RMS – Measurement category CAT IV 600 V CAT IV 600 V Batteries 4 x Mignon AA/LR6 4 x Mignon AA/LR6 5586 € 525.50 C (W514) Order No. …0100 …0103 Design: Status table provides information about the correct connection (OK, green) and the type of wiring fault (red: missing PE-, N-, L-conductor, L-/PE-conductor mixed up). Active PE test with touch electrode, LCD warns against fitting dangerous contact voltage (> 50 V) on the protective conductor terminal (PE). Test probe for 30 mA ELCB/RCD circuit breaker trigger. Clear display thanks to 3 LED and LC display. Application: Quick and easy testing of isolated safety plugs for correct connection. AC voltage 230 V Frequency range 50 Hz–60 HZ Measurement category CAT II 300 V 5586 € 49.80 (W514) Order No. …0500 Socket tester SDT 1 CAT II 300 V Insulation and resistance measuring instrument IP40 CAT IV 600 V 5586 0100 Determination of the Polarisation Index (PI) and Degree of Absorption (DAR). Limit values for ISO measurement selectable, green LED for test passed, red LED for test/external voltage. Switchable probes for initiating the measurement process. Internal memory for 100 measured values per measuring function. TRUE RMS voltage measurement with low-pass filter. Delivery incl. switchable test probe, test leads, crocodile clips, protective rubber frame, bag and batteries. 5586 0103 m Independent prevention of the test in case of countervoltage. Determination of the Polarisation Index (PI) and Degree of Absorption (DAR). With test function for checking the internal fuse. Delivery incl. measuring tip set, test leads, crocodile clips, protective rubber frame, bag and batteries. 5586 0100 5586 0103 Test and measuring devices 5
RkJQdWJsaXNoZXIy NTg4MTI=