Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 5/97 Design: Housing made of impact-resistant, unbreakable plastic, with automatic shutdown function. Application: For the safe current measurement at insulated cables, without having to remove or damage the insulation. Model CM 1-1 CM 1-2 CM 1-4 CM 2 CM 2-1 CM 7 CM 11 DC voltage – 0.1 V–600 V 6 V–1000 V 0.1 mV–600 V 0.1 mV–600 V 0.1 V–1000 V 0.01 V–600 V AC voltage – 0.1 V–600 V 6 V–1000 V 1 mV-600 V 0.1 mV–600 V 0.1 V–750 V 0.01 V–600 V Direct current – – – 10 mA–300 A 10 mA–400 A 0.1 A–1000 A 0.1 mA–10 A Alternating current 10 mA–400 A 0.1 A –400 A 0.1 A –200 A 100 mA–300 A 10 mA–400 A 0.1 A–1000 A 0.1 mA–20 A Resistance – 0.1 Ohm– 20 MOhm 1 Ohm– 50 kOhm 0.1 Ohm– 40 MOhm 0.1 Ohm– 40 MOhm 0.1 Ohm–400 Ohm 0.1 Ohm– 600 kOhm Continuity/diodes no/no Yes/no Yes/no Yes/no yes/yes Yes/no Yes/no Frequency – – – – – 1 Hz–400 Hz – Measurement value memory HOLD, MAX HOLD HOLD HOLD, MAX HOLD, MAX/MIN HOLD, MAX/MIN, PEAK, ZERO HOLD, MAX/ MIN, ZERO Measuring procedure RMS RMS TRUE RMS TRUE RMS TRUE RMS TRUE RMS TRUE RMS Pliers opening 30 mm 30 mm 16 mm 25 mm 27 mm 53 mm 23 mm Measurement category CAT III 600 V CAT III 600 V CAT IV 600 V CAT III 300 V CAT IV 300 V CAT IV 600 V CAT IV 300 V Protection type IP30 IP30 IP65 IP30 IP30 IP30 IP30 Batteries 1 x 6LR61 block battery 2 x micro AAA/LR03 2 x micro AAA/LR03 2 x micro AAA/LR03 2 x micro AAA/LR03 1 x 6LR61 block battery 2 x micro AAA/LR03 Display LCD LCD LED/LCD LCD LCD LCD LCD Continuity – – yes – – – yes 5585 € 80.20 107.00 250.50 210.00 226.00 326.50 377.50 (W514) Order No. …0101 …0102 …0104 …0200 …0201 …0700 …1100 Digital current clamp multimeter 5585 0101 CM 1-1. Supplied with compact protective case and battery. 5585 0102 CM 1-2. Delivery with compact protective case, dual-insulated safety measurement lines and batteries. 5585 0104 CM 1-4, open current clamp with additional LED step display. Precise due to true RMS measurement procedure TRUE RMS. Additionally suitable for rotary field direction, phase and polarity testing as well as for single-handed voltage testing of sockets. Voltage display from 50 V even when the batteries are empty. Delivery incl. belt holster, batteries and measuring lead set with contact tip magnification and tip protection. 5585 0200 CM 2. Precise due to true RMS measurement procedure TRUE RMS. Ideal for measuring small currents. Supplied with compact protective case, double insulated safety measurement cables and batteries. 5585 0201 m CM 2-1. Precise due to true RMS measurement procedure TRUE RMS. With volt sensor (NCV) for contactless detection of the phase voltage. Ideal for measuring small currents. Supplied with compact protective case, double insulated safety measurement cables and batteries. 5585 0700 CM 7. Ideal for current measurement up to 1000 A (alternate and direct current). Supplied with compact protective case, double insulated safety measurement cables and battery. 5585 1100 CM 11. Ideal for fault detection in electrical systems, controls, devices and MV electrics. Precise measurement of small direct/alternating currents with resolution of 0.1 mA. True real measuring value process TRUE RMS, measuring of standby, stray, difference, leakage and load currents. Supplied with compact protective case, double insulated safety measurement cables and batteries. 5585 1100 IP30 CAT IV 300 V 5585 0700 IP30 CAT IV 600 V 5585 0201 5585 0200 IP30 CAT III 300 V 5585 0104 IP65 CAT IV 600 V 5585 0102 IP30 CAT III 600 V 5585 0101 IP30 CAT III 600 V IP30 CAT IV 300 V Test and measuring devices 5
RkJQdWJsaXNoZXIy NTg4MTI=