FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 5/81 Contact surface W x H mm For conductor cross-section mm2 AWG Content Piece 5542 Order No. € 2.8 x 0.8 0.5–1 20–17 100 8.95 …1010 4.8 x 0.8 1.5–2.5 16–14 100 7.75 …1020 6.3 x 0.8 0.5–1.5 20–15 100 16.45 …1030 6.3 x 0.8 1.0–2.5 17–14 100 10.35 …1040 ​ (W525) Cable connectors 5542 1010 – 1040 Plug connector, uninsulated, according to DIN 46247 5542 2010 Flat push-on contact, insulated, with junction 5542 3010 – 3060 Ring cable lug, insulated, DIN 46237 5542 4010 – 4030 Butt connectors, with heat shrink tubing insulation 5542 5010 – 5030 Butt connectors, insulated 5542 6010 – 6040 Butt connectors, uninsulated 5542 7010 – 7100 Wire-end sleeve, insulated, DIN 46228-4 5542 8010 – 8090 Twin ferrule, insulated 5542 9010 – 9100 Wire-end sleeve, uninsulated, DIN 46228-1 5542 0010 – 0070 Design: Ferrules in transparent shaker. Rotating lid with opening to remove individual ferrules. 5542 0040 + 5542 0050 with twin ferrule Contact surface W x H mm For conductor cross-section mm2 AWG Content Piece 5542 Order No. € 6.3 x 0.8 0.5–1 20–17 100 17.80 …2010 ​ (W525) For screws ∅ mm For conductor cross-section mm2 AWG Content Piece 5542 Order No. € 4 1.5–2.5 15–13 100 11.45 …3010 5 1.5–2.5 15–13 100 13.25 …3020 6 1.5–2.5 15–13 100 14.45 …3030 5 4 –6 11–10 100 19.30 …3040 6 4 –6 11–10 100 19.15 …3050 8 4 –6 11–10 100 23.40 …3060 ​ (W525) For conductor cross-section mm2 AWG Content Piece 5542 Order No. € 0.75–1 20–18 100 62.10 …4010 1.5 –2.5 15–13 100 67.30 …4020 4 –6 11–10 100 120.50 …4030 ​ (W525) For conductor cross-section mm2 AWG Content Piece 5542 Order No. € 0.75–1 20–18 100 18.35 …5010 1.5 –2.5 15–13 100 20.60 …5020 4 –6 11–10 100 35.00 …5030 ​ (W525) For conductor cross-section mm2 AWG Content Piece 5542 Order No. € 0.75–1 20–18 200 29.20 …6010 1.5 –2.5 15–13 200 32.80 …6020 4 –6 11–10 100 36.30 …6030 10 7 100 58.70 …6040 ​ (W525) Crimping range mm Total length mm For conductor cross-section mm2 AWG Content Piece 5542 Order No. € 8 14 0.5 20 200 2.51 …7010 8 14 0.75 18 200 2.64 …7020 8 14 1 17 200 2.89 …7030 8 14 1.5 15 200 2.98 …7040 8 14 2.5 13 200 3.66 …7050 10 17 4 11 200 7.05 …7060 12 20 6 10 100 4.72 …7070 12 22 10 7 100 6.45 …7080 12 24 16 5 100 8.15 …7090 16 30 25 3 50 8.35 …7100 ​ (W525) Crimping range mm Total length mm For conductor cross-section mm2 AWG Content Piece 5542 Order No. € 8 15 2 x 0.5 2 x 20 200 6.55 …8010 8 16 2 x 0.75 2 x 18 200 6.40 …8020 8 15 2 x 1 2 x 17 200 7.20 …8030 10 18 2 x 1.5 2 x 15 200 9.45 …8040 9 18 2 x 2.5 2 x 13 100 4.50 …8050 12 23 2 x 4 2 x 11 100 9.20 …8060 14 26 2 x 6 2 x 10 50 6.10 …8070 12 24 2 x 10 2 x 7 50 10.20 …8080 16 29 2 x 16 2 x 5 25 6.25 …8090 ​ (W525) Crimping range mm For conductor cross-section mm2 AWG Content Piece 5542 Order No. € 6 0.5 20 200 2.08 …9010 6 0.75 18 200 2.08 …9020 6 1 17 200 2.17 …9030 7 1.5 15 200 2.30 …9040 7 2.5 13 200 2.76 …9050 9 4 11 200 3.66 …9060 12 6 10 100 2.80 …9070 12 10 7 100 3.70 …9080 12 16 5 100 4.68 …9090 12 25 3 50 4.00 …9100 ​ (W525) Design Set content 5542 Order No. € 150-piece, with insulated ferrules each 30 pieces 0.25; 0.34; 0.5; 0.75; 1 mm2 9.85 …0010 400-piece, with insulated ferrules each 50 pieces 0.5; 2.5; 100 pieces of 0.75; 1; 1.5 mm2 9.85 …0020 100-piece, with insulated ferrules 50 pieces 4; each 20 pieces of 6; 10; 10 pieces 16 mm2 9.85 …0030 200-piece, with twin ferrules blade cut each 50 pieces 2 x 0.75; 2 x 1; 2 x 1.5; 2 x 2.5 mm2 9.85 …0040 200-piece, with twin ferrules blade cut each 50 pieces 2 x 4; 2 x 6; 2 x 10; 2 x 16 mm2 9.45 …0050 1900-piece, with uninsulated ferrules each 500 pieces 0.5; 0.75; 400 pieces 1; 300 pieces 1.5; 200 pieces 2.5 mm2 17.60 …0060 350-piece, with uninsulated ferrules 150 pieces 4; each 75 pieces of 6; 10; 50 pieces 16 mm2 10.85 …0070 ​ (W525) Cable connectors 5

RkJQdWJsaXNoZXIy NTg4MTI=