All prices quoted are non-binding recommended prices. 5/78 Design: Made of special grade, chromium-vanadium electric steel, hardened in oil. Slim head. For optimum crimping results due to the precision profiles and unlockable locking mechanism; precise factory-set crimping pressure. Due to the freely rotating die, it is possible to insert the ferrules from almost any position. The especially large crimping zone reduces crimping errors. Power boost due to the leverage transmission, handles with multi-component plastic coating. With one crimping zone. Application: For the crimping of ferrules according to DIN 46228 (Part 1 + 4), with plastic collar, also twin ferrules 2 x 6 mm2. Conductor cross-section mm2 Length mm 5524 Order No. € 0.14–16 200 170.50 …0015 0.14–10 200 170.50 …0020 (W525) Crimping pliers for ferrules, Twistor® 5524 0015 Square pressing. Note: A range with these pliers and the matching ferrules can be found under Order No. 5549 0015, Ç 5/85. 5524 0020 m Trapezoid pressing. 5524 0020 5524 0015 360° rotating head with 8 locking position. Design: Pliers made of steel, handles with plastic coating. Change of crimping profile without tools. Processing from side. Supplied in nylon folder with foam module. Application: For the crimping of ferrules DIN 46228 (Part 1 + 4), connectors, flat plugs and flat plug sleeves DIN 60352. 5 interchangeable inserts for machining: Ferrules 0.5–6 mm2; 6–16 mm2 Insulated cable lugs 0.5–6 mm2 Non-insulated cable lugs 0.75–10 mm2 Flat push-on contacts and flat plugs 0.5–6 mm2 Design Set content 5518 Order No. € 6-piece 1 crimping pliers 5 interchangeable inserts 185.50 …1000 (W512) Crimping pliers with interchangeable inserts Design: All loaded parts made of special grade, chromium-vanadium electro-steel, hardened and tempered in oil. Burnished head. Handles with multi-component plastic coating for single- and double-handed operation. Safe and dirt-protected storage of interchangeable inserts in round magazine with belt clip. High crimping quality due to precision profile and integral lock. Change of crimping profile without tools. Precise, preset crimping pressure. Processing from side. Length mm 5511 Order No. € 250 200.50 …0003 250 261.50 …0005 (W525) Crimping pliers with interchangeable magazine MultiCrimp® 5511 0003 3 interchangeable inserts for machining: Ferrules 0.25–6 mm2 Insulated cable lugs, plug connectors and butt connectors 0.5–6 mm2 Non-insulated, open plug connectors 0.5–6 mm2 5511 0005 5 interchangeable inserts for machining: Ferrules 0.25–6; 10; 16; 25 mm2 Insulated cable lugs, plug connectors and butt connectors 0.5–6 mm2 Non-insulated, open plug connectors 0.5–6 mm2 Non-insulated, cable lugs and plug connectors 0.5–10 mm2 5511 0005 5511 0003 Crimping pliers 5
RkJQdWJsaXNoZXIy NTg4MTI=