FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 5/75 Design: Pliers made of steel, with locking mechanism for correct, complete crimping. Quick-release in case of incorrect operation. Only one crimping nest for the entire cross-sectional area thanks to omega spring. Handles with plastic coating. Processing from side. Application: For the crimping (trapezoid crimping) of ferrules according to DIN 46228 (Parts 1 + 4), with and without plastic collar. Conductor cross-section mm2 Length mm 5518 Order No. € 0.5–4 200 130.50 …0020 ​ (W512) Crimping pliers for ferrules Design: Pliers made of steel, with locking mechanism for correct, complete crimping. Quick-release in case of incorrect operation. Handles with multi-component plastic coating. Application: For the crimping of ferrules DIN 46228 (Parts 1 + 4), with and without plastic collar. Conductor cross-section mm2 Crimping zones 5506 5515 5521 5527 5517 5519 5514 5516 5498 Order No. PZ 4 PZ 16 PZ 3 PZ 6 roto PZ 6 roto L PZ 6 roto ADJ PZ 10 HEX PZ 10 SQR PZ 50 € € € € € € € € € 0.5 – 4 1 186.00 – – – – – – – – …0005 6 –16 3 – 207.00 – – – – – – – …0005 0.5 – 6 1 – – 215.50 – – – – – – …0005 0.14– 6 1 – – – 206.00 206.00 206.00 – – – …0005 0.14–10 1 – – – – – – 227.50 227.50 – …0005 25 + 35 + 50 3 – – – – – – – – 300.00 …0005 ​ (W521) (W521) (W521) (W521) (W521) (W521) (W521) (W521) (W521) Crimping pliers PZ for ferrules 5506 Trapezoid pressing. Processing from side. Note: A range with these pliers and the matching ferrules can be found under Order No. 5551 0005, Ç 5/86. 5515 Identical pressing, crimp complies with EN 60947-1. Processing from side. 5521 Square pressing. Processing from front. 5527 Trapezoid pressing. Due to rotating die, it is possible to introduce the ferrules both from the side and the front. 5517 Trapezoid pressing. With rotatable die. Due to rotating die, it is possible to introduce the ferrules both from the side and the front. Locking knob fixes the crimp insert. Note: A range with these pliers and the matching ferrules can be found under Order No. 5551 0010, Ç 5/86. 5519 m Trapezoid pressing. With rotatable die and grip width adjustment. Due to rotating die, it is possible to introduce the ferrules both from the side and the front. Locking knob fixes the crimp insert. 5514 Hexagonal pressing. Processing from side. 5516 Square pressing. Processing from side. 5498 Trapezoid pressing. Processing from side. 5498 5516 5514 5519 5517 5527 5521 5515 5506 Crimping pliers 5

RkJQdWJsaXNoZXIy NTg4MTI=