All prices quoted are non-binding recommended prices. 5/58 Design: Made of special grade, special tool steel; forged; hardened and tempered in oil. Chrome-plated head. With clamping protection. Hardened cutting edges with precision sharpening, easy single-handed cutting, smooth, clean and without squashing. Self-locking and adjustable screwed hinge. Insulated up to 1000 V according to IEC 60900, DIN EN 60900, VDE 0682/Part 201. Application: For the cutting of single- and multi-wire copper and aluminium cables. Note: Not suitable for steel wire and hard-drawn copper conductors. Cutting values ∅ mm Conductor cross-section mm2 Length mm 5381 5382 5387 Order No. € € € 15 50 160 46.40 – – …0160 15 50 165 45.40 – – …0165 20 70 200 – 57.80 62.80 …0200 (W525) (W525) (W525) VDE cable shears 5381 0160 Up to 40% higher cutting performance due to stepped cutting edges compared to normal cable shears of the same length. Slim head shape, allows cutting in difficult to access areas. Handles with multi-component plastic coating, with recessed grip and indented lettering. 5381 0165 Handles with multi-component plastic coating, with recessed grip and indented lettering. 5382 Handles with multi-component plastic coating, with recessed grip and indented lettering. Cables with diameters up to 20 mm Ø can also be separated with the pre-cut and re-cut (1st and 2nd blades). 5387 Handles with plastic coating. Cables with diameters up to 20 mm Ø can also be separated with the pre-cut and re-cut (1st and 2nd blades). 5387 5382 5381 0165 5381 0160 Design: Made of stainless surgical steel, air-hardened. Polished head. Hardened blades with precision sharpening, easy single-handed cutting, cuts clean and smooth, without squashing. Self-locking and adjustable screwed hinge with clamping protection. Plastic-coated shock-proof handles, insulated up to 1000 V, according to IEC 60900, DIN EN 60900, VDE 0682/Part 201. Application: For the cutting of single- and multi-wire copper and aluminium cables. Note: Not suitable for steel wire and hard-drawn copper conductors. Cutting values ∅ mm Conductor cross-section mm2 Length mm 5389 Order No. € 16 50 230 51.30 …0230 (W525) VDE cable shears Design: Handy, small shape. Made of steel, forged. Polished head. Blades for cutting thin or thick single- and two-core cables. Handles with multi-component plastic coating, insulated up to 1000 V according to IEC 60900, DIN EN 60900, VDE 0682/Part 201. Application: For squash-free cutting of copper and aluminium cables. Note: Not suitable for steel wire, steel-reinforced cable, aluminium alloys and hard-drawn copper conductors. Model Cutting values ∅ mm Conductor cross-section mm2 Length mm 5386 Order No. € KT 8 8 16 185 42.00 …0165 KT 12 12 25 225 44.80 …0200 KT 22 22 50 245 58.40 …0245 (W521) VDE cable shears 5386 0165 With double-notched, ground blade. 5386 0200 With double-notched, ground blade. 5386 0245 m With notched, ground blade. 5386 0245 5386 0200 5386 0165 Cable shears 5
RkJQdWJsaXNoZXIy NTg4MTI=