Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 5/39 Design: Made of chromium-vanadium high-performance steel, forged, hardened and tempered in oil. Blades additionally inductively hardened (64 HRC). With high purchase, 40% reduced effort when compared with side-cutting pliers of the same length due to the improved leverage ratio with the offset pivot point. Doublemounted hinge axle for heavy-duty use over the long term. Handles with multi-component plastic coating. Application: Ideal for universal use in installation, maintenance and production. Length mm Soft wire mm Medium-hard wire mm Hard wire mm Piano wire mm 5294 Order No. € 160 4.8 3.8 2.7 2.2 36.50 …0160 160 4.8 3.8 2.7 2.2 42.80 …1160 160 4.8 3.8 2.7 2.2 43.70 …2160 (W525) X-Cut® compact side-cutting pliers 5294 0160 Polished head. 5294 1160 Chrome-plated head. 5294 2160 Chrome-plated head. With recessed grips and indented lettering. Insulated up to 1000 V according to IEC 60900, DIN EN 60900, VDE 0682/Part 201. 5294 2160 5294 1160 5294 0160 Design: DIN ISO 5749. Made of chromium-vanadium high-performance steel, forged, hardened and tempered in oil. Polished head. Optimum transmission due to the double-hinge design for 50% less force when compared to normal high-leverage side-cutting pliers of the same length. Welded-on and precisionmilled hinge axles for high stability and zero-clearance working. Dampening of cutting impact to protect the hand. Handles with multi-component plastic coating. Application: For rough and fine cutting of all types of wire and band materials. Particularly suited for multi cutter or especially hard cutting cases. Length mm Soft wire mm Medium-hard wire mm Hard wire mm Piano wire mm 5291 Order No. € 180 5.5 4.6 3.2 3 59.80 …0180 (W525) TwinForce® high-performance side-cutting pliers Design: Made of vanadium electric steel, hardened and tempered in oil. Polished head. Particularly high cutting performance compared to other lever end cutters, with less effort due to optimal transmission. Blades additionally inductively hardened (64 HRC). Handles with plastic coating. Application: Ideally suited to wire and fencing construction, as well as for cutting bolts, nails etc. Length mm Soft wire mm Medium-hard wire mm Hard wire mm Piano wire mm 5287 Order No. € 200 6 4 3.5 3 48.20 …0200 (W525) Bolt end-cutting pliers Design: DIN ISO 5748. Made of chromium-vanadium heavy-duty steel, hardened and tempered in oil, polished head. High cutting force with little effort due to the ideal set-up of the cutting angle and transmission ratio. Blades additionally inductively hardened (64 HRC). Handles with plastic coating. Application: For cutting hard and soft wire. Also suitable for twisting and cutting binding wire. Length mm Soft wire mm Medium-hard wire mm Hard wire mm Piano wire mm 5281 Order No. € 140 4 3.1 2 1.5 26.50 …0140 160 4.5 3.5 2.2 2 27.60 …0160 200 5 3.8 3 2.5 34.20 …0200 (W525) High-leverage end cutter Side-cutting pliers, end-cutting pliers 5
RkJQdWJsaXNoZXIy NTg4MTI=