Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 5/29 Design: DIN ISO 5746. Made of special tool steel, hardened and tempered in oil. Chrome-plated head, jaws with grip zones for flat and round materials, inductively hardened blades (60 HRC). Handles with multicomponent plastic coating, insulated up to 1000 V according to IEC 60900, DIN EN 60900, VDE 0682/ Part 201. Length mm Hard wire mm 5151 5154 Order No. € € 5151 5154 160 1.8 2 18.05 23.20 …0160 180 2.5 2.2 19.05 25.10 …0180 200 2.8 2.5 21.20 28.00 …0200 (W512) (W525) VDE universal pliers 5151 Optimised gripping zone for flat material. 5154 5151 Design: DIN ISO 5746. Made of chromium-vanadium high-performance steel, hardened and tempered in oil. Chrome-plated head, extremely hard-wearing jaws (53 HRC) additional hardening, with grip zones for flat and round materials, ultra-precise blades for all wires including piano wire, additional inductive hardening (64 HRC), handles with multi-component plastic coating with recessed grips and indented lettering, insulated up to 1000 V according to IEC 60900, DIN EN 60900, VDE 0682/Part 201. Length mm Hard wire mm Piano wire mm 5155 Order No. € 160 2 1.5 33.40 …0160 190 2.5 2 37.10 …0190 (W525) VDE universal pliers Design: Made of annealed steel C 60, hardened and tempered in oil. Extremely torsion-proof, tapering jaws with milled groove to hold and pull out nails, pins etc. as well as gripping zone for flat and round material. Up to 30% reduced effort due to improved leverage ratio when compared with normal universal pliers of the same length, thus suitable for all wires, including piano wire and the toughest endurance stress. Handles with multi-component plastic coating. Application: Ideal for work at narrow places and as a practical helper on-the-go. High-leverage tip combination pliers Length mm Hard wire mm Piano wire mm 5176 Order No. € 160 2.2 1.6 20.70 …0160 180 2.5 2 23.00 …0180 200 2.7 2.3 25.30 …0200 (W512) 5176 Insulated up to 1000 V according to IEC 60900, DIN EN 60900, VDE 0682/Part 201. Length mm Hard wire mm Piano wire mm 5177 Order No. € 160 2.2 1.6 24.40 …0160 180 2.5 2 27.10 …0180 200 2.7 2.3 29.90 …0200 (W512) 5177 Length mm Hard wire mm 5148 5153 Order No. € € 5148 5153 160 1.8 2 15.30 19.95 …0160 180 2.5 2.2 15.95 21.40 …0180 200 2.8 2.5 18.60 24.40 …0200 (W512) (W525) Universal pliers 5153 5148 Design: DIN ISO 5746. Made of special tool steel, hardened and tempered in oil. Chrome-plated, jaws with grip zones for flat and round materials, inductively hardened blades (60 HRC), handles with multi component plastic coating. Combination pliers 5
RkJQdWJsaXNoZXIy NTg4MTI=