FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/70 Design: The spiral length is longer than the height of the bushes. Application: For drilling out pre-drilled, pre-cast or pre-punched holes. The sturdy construction and 3 blades means that alignment inaccuracies and runouts in pre-drilled holes are corrected. In addition, the drill wall surface is so far improved that it can then be thoroughly finished with a reamer. Please pay attention to the column "smallest Ø of pre-drilled hole". Note: The cut diameter must be smaller than the hole to be drilled out. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 22 20 8 – 6 5 25 20 – 36 – 50 – – – – 1085 ∅ h8 mm Spiral length mm Total length mm Smallest Ø of pre-drilled hole mm MT 1085 Order No. € 7.8 75 156 5.6 1 52.70 …0780 8.8 81 162 6.3 1 C◊ …0880 9.8 87 168 7 1 55.70 …0980 10 87 168 7 1 68.20 …1000 10.75 94 175 7.7 1 C◊ …1075 11 94 175 7.7 1 61.40 …1100 11.75 101 182 8.4 1 62.40 …1175 12 101 182 8.4 1 58.40 …1200 12.75 101 182 9.1 1 72.10 …1275 13 101 182 9.1 1 64.30 …1300 13.75 108 189 9.8 1 72.10 …1375 14 108 189 9.8 1 65.30 …1400 14.75 114 212 10.5 2 83.80 …1475 15 114 212 10.5 2 73.20 …1500 15.75 120 218 11.2 2 77.00 …1575 16 120 218 11.2 2 75.00 …1600 16.75 125 223 11.9 2 92.60 …1675 17 125 223 11.9 2 79.90 …1700 17.75 130 228 12.6 2 87.70 …1775 18 130 228 12.6 2 81.80 …1800 18.7 135 233 13.3 2 98.50 …1870 19 135 233 13.3 2 85.80 …1900 19.7 140 238 14 2 91.60 …1970 20 140 238 14 2 80.90 …2000 20.7 145 243 14.6 2 115.00 …2070 21 145 243 14.6 2 C◊ …2100 21.7 150 248 15.3 2 115.00 …2170 22 150 248 15.3 2 107.50 …2200 22.7 155 253 16 2 121.00 …2270 23 155 253 16 2 114.00 …2300 23.7 160 281 16.6 3 C◊ …2370 24 160 281 16.6 3 124.50 …2400 24.7 160 281 17.3 3 135.50 …2470 25 160 281 17.3 3 119.00 …2500 25.7 165 286 18 3 C◊ …2570 26 165 286 18 3 134.50 …2600 26.7 170 291 18.6 3 C◊ …2670 27 170 291 18.6 3 161.00 …2700 27.7 170 291 19.3 3 C◊ …2770 28 170 291 19.3 3 147.00 …2800 28.7 175 296 20 3 C◊ …2870 29 175 296 20 3 179.50 …2900 29.7 175 296 20.5 3 169.50 …2970 30 175 296 20.5 3 178.50 …3000 ​ (W109) steam Core drill, with Morse taper shank HSS DIN 343 N 3 120° 22° steam Drills HSS/HSS-E 1.1

RkJQdWJsaXNoZXIy NTg4MTI=