Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 5/9 Design: Hollow profile rail made from statically optimised, cold-drawn quality steel, zinc-plated, fixed and mobile brackets made from high-quality, powder-coated cast iron, spindle with trapezoidal thread, burnished, with wooden handle and mobile-mounted, completely flat pressure plate. The screw clamps to jaw width 400 mm, fitted with plastic protective caps on the pressure plate and on the upper part for gentle clamping. Application: Multi-purpose clamping tool for holding items for processing or connecting to other parts. Clamping width mm Projection mm Slide rail mm 5091 5092 Order No. € € 100 50 15 x 5 9.40 12.65 …0010 120 60 20 x 5 11.70 16.85 …0012 160 80 25 x 6 14.00 20.20 …0016 200 100 27 x 7 18.50 27.90 …0020 250 120 29 x 9 22.50 33.80 …0025 300 140 32 x 10 27.90 42.30 …0030 400 175 32 x 10 34.20 51.60 …0040 500 120 35 x 11 34.90 52.50 …0050 600 120 35 x 11 37.10 55.30 …0060 800 120 35 x 11 41.70 62.70 …0080 1000 120 35 x 11 46.80 70.20 …0100 1250 120 35 x 11 50.60 76.60 …0125 1500 120 35 x 11 55.60 85.60 …0150 2000 120 35 x 11 68.00 104.50 …0200 2500 120 35 x 11 82.70 127.00 …0250 (W509) (W510) Malleable cast iron clamp, wooden handle 5091 Hollow profile rail with ribbing. Clamping force up to 5.5 kN. 5092 Hollow profile rail slip-proof due to threaded pin in mobile bracket. Clamping force up to 7 kN. Pressure plates with radii from 80 mm can be swapped without tools. 5092 Slip-guard 5092 5091 Design: Hollow profile rail made from statically optimised, cold-drawn quality steel, 6-way serrated and zincplated. Fixed and mobile brackets made from high-quality, powder-coated cast iron, spindle with trapezoidal thread, burnished, with wooden handle and mobile-mounted, completely flat pressure plate. Application: Especially for clamping forces up to 7 kN. Multi-purpose clamping tool for holding widely projecting items for processing or connecting to other parts. Clamping width mm Projection mm Slide rail mm 5096 Order No. € 400 200 35 x 11 55.00 …0039 400 250 40 x 11 70.00 …0040 600 250 40 x 11 78.50 …0060 800 300 45 x 12 99.30 …0080 800 400 45 x 12 141.00 …0081 1000 300 45 x 12 109.50 …0100 (W510) Deep jaw screw clamp Design: Spindle with trapezoidal thread, burnished. With bracket for fixing to all standard screw clamps with max. slide rail cross section 13 x 45 mm. With mobile pressure plate and wooden handle. Application: Easy gluing of head and edge strips (in connection with conventional vices). In addition, it is ideally suited to the stabilising of clamps with very large jaw widths. Number of spindles Piece for rail thickness of max. mm 5098 Order No. € 1 13 13.05 …0006 2 13 20.90 …0050 (W510) Edge clamp 5098 0006 5098 0050 Clamps 5
RkJQdWJsaXNoZXIy NTg4MTI=