FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 5/3 Design: Die-forged, jaws and anvil inductive-hardened (52–58 HRC), anvil surface suitable for straightening and compressing work. Front-opening, precise clamping due to an adjustable bearing which is protected from dirt by a wiper. Jaw width mm Jaw span/ depth mm Clamping range pipes external Ø Inch Hole distance/-∅ mm Anvil surface mm 5015 5010 Order No. € € 5015 5010 115 140/74 – 3/8–1.1/2 102/13.5 46 x 60 147.00 158.50 …0115 125 160/73 – 3/8–1.1/2 113/13.5 50 x 70 161.00 173.00 …0125 135 170/88 – 3/8–1.1/2 120/16 56 x 75 196.00 209.50 …0135 150 190/96 – 3/8–2.1/2 137/16 68 x 84 219.50 234.50 …0150 ​ (W500) (W500) Parallel vice 5015 With holder for swivelling and interchangeable pipe-clamping jaws. Note: For swing clamps and replacement pipe rams see Order No. 5028 and 5029. 5010 With welded pipe-clamping jaws. 5010 5015 Design: Steel-forged, can be freely adjusted using the set screw. Application: To rotate the vice 360°. for jaw width mm Hole distance/-∅ mm 5006 Order No. € 125 113/13.5 49.70 …0125 135 120/16 51.40 …0135 150 137/16 56.10 …0150 ​ (W500) Rotary plate 5006 Note: To suit parallel vices Order order no. 5013 and 5015. for jaw width mm 5028 5029 Order No. € € 120 35.20 38.30 …0120 140 43.10 41.10 …0140 160 48.00 43.80 …0160 180 52.70 – …0180 ​ (W500) (W500) Clamping jaw for parallel vices 5028 Swivel-mounted pipe-clamping jaw (only one required), forged and hardened, for secure and firm clamping (3-point clamping) of pipes. 5029 Plastic protective jaw (2 units required) for the gentle clamping of delicate items. 5029 5028 Design: Heavy, solid design made of high-strength grey cast iron, the best clamping precision due to the long and precise dovetail guide. Concealed, dirt-proof and smooth-running acme thread spindle, interchangeable and reversible hardened steel jaws, integrated pipe-clamping jaws, opens to rear and with large anvil surface for simple straightening work. Application: Suitable for multiple uses due to its solid construction and especially precise guiding/ clamping. Jaw width mm Clamping width mm Clamping depth mm 5004 Order No. € 100 140 84 246.00 …0100 125 180 88 285.50 …0125 150 280 98 444.00 B …0150 ​ (W501) Precision parallel vice 5004 Application: To rotate the vice 360°. Rotary plate m 5007 for jaw width mm 5007 Order No. € 100 145.00 …0100 125 164.00 …0125 150 218.50 …0150 ​ (W501) Vices 5

RkJQdWJsaXNoZXIy NTg4MTI=