Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 4/137 Design: Foil tape 150 x 2500 mm. Supplied in plastic box. Application: For setting up tools, adjusting apparatus, aligning tolerances, placing under devices, setting up moulds, setting bearings, etc. Note: The plastic boxes can be attached to each other and stacked. Thickness mm Tolerance mm 4494 4496 4498 Order No. € € € 0.025 0.002 27.80 25.70 41.00 …0025 0.05 0.003 16.10 24.60 33.70 …0050 0.075 0.005 16.15 27.30 33.20 …0075 0.1 0.005 15.70 30.70 34.50 …0100 0.15 0.005 16.15 37.40 39.60 …0150 0.2 0.007 16.75 44.10 47.10 …0200 0.25 0.007 18.70 49.70 50.50 …0250 0.3 0.007 21.30 56.10 53.90 …0300 0.4 0.01 24.10 60.20 56.90 …0400 0.5 0.01 26.60 69.70 61.80 …0500 (W448) (W448) (W448) Metal foil 4494 Steel, unalloyed. 4496 Brass (MS 63). 4498 Rustproof steel (18 Cr 9 Ni). Thickness mm Dimension mm Gradient mm 4499 Order No. € 0.025–0.1 1200 x 150 0.025; 0.05; 0.075; 0.1 52.40 …0001 (W448) Metal foil assortment, brass Design: Metal foils with thickness tolerance T3 made of spring band steel. Supply in sturdy plastic slide. Application: For setting up tools and moulds, adjusting devices and apparatus, aligning tolerances, placing under devices, aligning machines, setting bearings, etc. Note: The material has been approved for springs in accordance with DIN 17222 (new: DIN EN 10 132-4). Thickness mm Length mm Width mm PU 4501 4503 Order No. € € 0.01 300 50 10 ∆ – 60.60 …0010 0.02 300 50 10 ∆ – 34.50 …0020 0.03 300 50 10 ∆ 25.30 25.90 …0030 0.04 300 50 10 ∆ 25.30 27.40 …0040 0.05 300 50 10 ∆ 21.30 18.30 …0050 0.1 300 50 10 ∆ 16.95 18.50 …0100 0.15 300 50 10 ∆ 17.75 20.80 …0150 0.2 300 50 10 ∆ 17.35 21.70 …0200 0.25 300 50 10 ∆ – 24.00 …0250 0.3 300 50 10 ∆ 18.10 24.90 …0300 0.4 300 50 10 ∆ 19.80 26.80 …0400 0.5 300 50 10 ∆ 21.10 29.00 …0500 (W445) (W445) Precision underlay film ∆ Can only be supplied as a whole packaging unit. 4501 C-steel, hardened spring band steel 1.1274, magnetic. For highly loaded parts due to a carbon content of over 1%. For feeler gauge bands, underlay foils, springs without the need for corrosion protection. 4503 Stainless spring band steel 1.4310, slightly magnetic. Good corrosion resistance due to 17% chrome and 7% nickel content. High strength due to cold rolls and high tensile strength of 1500 to 1700 N/mm2. Well suited for stainless precision gauge tapes, shims, stainless springs and parts with higher strength. INOX Continued on next page Feeler gauges 4.8
RkJQdWJsaXNoZXIy NTg4MTI=