FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 4/127 Design: Versatile layer thickness measuring instrument with external probe, precise measuring technology and the possibility of fast on-site extension via enabling codes (software modules "Statistics" and "Data storage"). Large, backlit graphics display (48 x 24 mm), large selection of probes. Measurement range 0–20000 µm (dependent on probes), 10 selectable languages, USB/RS232 interface and rubber protective frame. Battery lifetime approx. 100 hours. Supplied with Fe probe to 5000 µm, control body, set of calibration foils, operating instructions, acceptance protocol/quality test certificate, measurement protocol, specialist literature and 2 Mignon batteries AA/LR06, 1.5 V, in plastic case. Measuring uncertainty (after calibration): Layer thickness < 100 µm: 1 % of the measurement value ± 1 µm Layer thickness > 100 µm: 1–3 % of the measurement value ±1 µm Layer thickness > 1000 µm: 3–5 % of the measurement value ±10 µm Layer thickness > 10000 µm: 5 % of the measurement value ± 100 µm Application: Determines the thickness of non-magnetic layers on magnetisable substrate (Fe, acc. to DIN EN ISO 2178) and the thickness of non-conductive layers on conductive base materials acc. to the eddy-current principle (NFe, acc. DIN EN ISO 2360). Note: Further probes and comprehensive accessories, such as measurement value storage with easy data management such as under Windows, limit value input and monitoring, statistical evaluations with up to 999 measurement values, different PC assessment programs, many calibration options as well as software extension for data storage (e.g. PC software, data cable printer) are available on request. 4935 Order No. € C◊ …0250 (W001) Layer thickness measuring instrument, Leptoskop® Design: Digital force gauge with reversible display, automatic detection of direction. Peak hold function for detecting the peak value or track function for continuous measurement display. Auto power off. Supplied with standard 6-piece attachments and 6 Mignon batteries AA/LR06, 1.5 V, in transport packaging. Measurement range N Reading N Measurement units Thread 4940 Order No. € 100 0.05 N, lb, kg, oz M8 286.00 …0100 250 0.1 N, lb, kg, oz M8 286.00 …0250 500 0.2 N, lb, kg, oz M8 286.00 …0500 1000 0.5 N, lb, kg, oz M8 286.00 …1000 ​ (W498) Tensile and pressure force gauge Design: With drag indicator, max. mode captures the peak value, point mode shows the stable measured value. Supplied in plastic box. Application: Measuring the Shore penetration depth: Plastics, resin, Formica, epoxy, acrylic etc. Recommended especially for internal comparison measurements, where standard calibration, e.g. according to DIN 7619-1 is not possible. Measurement range Reading Hardness 4941 Order No. € 100 HD 1 HD Shore D 173.50 …0100 ​ (W498) Hardness tester, Shore-Duometer Design: For reproducible hardness testing with base plate of glass. High measurement accuracy due to increased hardness of the base plate. Mechanical design allows precise measurement movements. Levelling device for precise levelling of the base plate. Levelling test bench for inhomogeneous test objects. Application: Suitable for Shore hardness testing of hard plastics, resopal, epoxy resin, etc. The SAUTER HB hardness tester is mounted in a hanging position. The test object is placed on the round testing table right under the probe tip. By depressing the lever, the probe tip is pressed in a defined manner into the test object. Note: The accuracy of the measurement result with this test is about 25% higher than for a hand measurement. Supplied without Shore-Durometer. Length of stroke mm Measuring faces ∅ mm max. object height mm Dimension mm 4941 Order No. € 15 75 63 150 x 110 x 400 369.00 B …0111 ​ (W498) Lever test stand, for Shore-Duometer Layer thickness measurement devices 4.7

RkJQdWJsaXNoZXIy NTg4MTI=