FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 4/101 Length m Width mm Joint thickness mm Joint number 4671 Order No. € 2 16 3 10 2.72 …0010 ​ (W462) ​ Design: Made of beechwood, brass-plated steel spring, riveted joint connection, 3 mm thick arms, colour white, black mm graduation on the upper and lower joint edges. Wooden folding ruler EG III Length m Width mm Joint thickness mm Joint number 4671 Order No. € 2 16 3.3 10 4.16 …0020 ​ (W462) Design: Made of 3.3 mm thick beechwood, joint height 16 mm, optimum readability thanks to concealed rivets, closely situated joints through the joint plates embedded in the wood. Wooden folding ruler EG III Length m Width mm Joint thickness mm Joint number 4671 Order No. € 2 17 3 10 4.51 …0005 ​ (W462) Design: Made of beechwood with 3.0 mm thick joints and inner, maintenancefree steel springs. The recessed joints allow for a continuous straight edge when unfolded. Robust, white protective paint with easily readable, black mm graduation on the upper and lower joint edges. Wooden folding ruler EG III Length m Width mm Joint thickness mm Joint number 4667 Order No. € 2 17 3 10 3.61 …0005 ​ (W467) Design: Made of beechwood with 3.0 mm thick joints and concealed, oiled joint connection. Robust, yellow protective paint with easily readable, black mm graduation on the upper and lower joint edges and red tens digits. Wooden folding ruler EG III Design: Made of beechwood with 3.0 mm thick joints and concealed, oiled joint connection. Robust paint, white and yellow alternating in decimal steps. Easily readable, black mm graduation on the upper and lower joint edges and red tens digits. Length m Width mm Joint thickness mm Joint number 4667 Order No. € 2 17 3 10 5.15 …0010 ​ (W467) Wooden folding ruler EG III EC accuracy classes The EC accuracy classes define the maximum variations in measurements. They are divided into 3 classes, considering material and temperature. Tolerances: Folding rulers: Class I: ±0.2 mm to 1 m; ±0.3 mm to 2 m Class II: ± 0.5 mm to 1 m; ± 0.7 mm to 2 m; ± 0.3 mm above the joint Class III: ± 1.0 mm to 1 m; ± 1.4 mm to 2 m; ± 0.5 mm above the joint Tape measures: The tolerances of 20 °C and a tensile fore of 20 N for plastic and 50 N for stainless steel tapes Class I: ±1.1 mm to 10 m Class II: ±2.3 mm to 10 m Class III: ±4.6 mm to 10 m Rulers 4.6

RkJQdWJsaXNoZXIy NTg4MTI=