FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 4/99 Design: With hand thermal protection. Application: For inspecting the straightness of surfaces using the light gap method. Length mm Tolerance mm 4452 Order No. € 75 0.002 21.70 …0075 100 0.002 25.20 …0100 125 0.003 27.70 …0125 150 0.003 34.90 …0150 ​ (W459) Length mm Tolerance mm 4452 Order No. € 200 0.003 39.20 …0200 300 0.004 82.20 …0300 500 0.004 175.50 …0500 ​ (W459) Straight edge DIN 874/00 INOX Design: Made of tool steel, upright edges and flat sides accurately machined. With I-shaped cross-sections. Application: For inspections and for highly accurate work in precision mechanical engineering. Length mm Width mm Thickness mm 4757 Order No. DIN 874/I € 500 40 8 62.90 B …0501 1000 50 10 135.00 B …1001 1500 60 12 247.00 B …1501 2000* 70 14 696.00 B …2001 ​ (W457) Length mm Width mm Thickness mm 4757 Order No. DIN 874/II € 500 30 6 47.20 B …0502 1000 40 8 87.60 B …1002 1500 50 10 170.50 B …1502 2000 60 12 247.00 B …2002 ​ (W457) Precision straight edge * With 2 hand slots. DIN 874/I DIN 874/II Design: Made of hardened spring band steel, scale intervals 1 mm. With 2 graduations for the circumference and diameter. Application: For measuring the circumference and diameter. for circumference mm for diameter mm Tape width mm Reading mm 4752 Order No. € 60– 950 20– 300 10 0.1 56.80 …0001 940–2200 300– 700 10 0.1 69.50 …0004 2190–3460 700–1100 10 0.1 91.00 …0007 ​ (W463) for circumference mm for diameter mm Tape width mm Reading mm 4752 Order No. € 4710–5980 1500–1900 10 0.1 129.50 …0013 5960–7230 1900–2300 10 0.1 157.00 …0016 ​ (W463) Circumference tapes Magnetic prisms For measuring, grinding, eroding and mounting. Also use directly on the magnetic chuck without losing its holding force. Ç 3/200 Rulers 4.6

RkJQdWJsaXNoZXIy NTg4MTI=