All prices quoted are non-binding recommended prices. 4/92 Design: Made of hardened, rustproof steel, rectangularity, parallelism and planarity tolerances. For highest accuracy. Upright edges and straight edges finely ground. Supplied in transport packaging. Application: For checks and testing work using the light gap method. Stock length mm Cross-section mm Angle tolerance mm 4621 Order No. € 50 x 40 14 x 4 0.003 28.20 …0500 75 x 50 15 x 4 0.003 33.10 …0750 100 x 70 20 x 5 0.003 39.90 …1000 150 x 100 25 x 6 0.004 51.50 …1500 200 x 130 30 x 7 0.004 77.00 …2000 300 x 200 40 x 8 0.005 167.50 …3000 500 x 330 40 x 10 0.007 792.50 …5000 (W410) Precision hair angle, rustproof DIN 875/00 INOX Design: Rectangularity, parallelism and evenness tolerances. For highest accuracy. Reading parts matt chrome-plated, straight edge 7 x 7 x 100 mm, slidable, adjustable angle up to ± 5°. Supplied in a wooden box. Application: For checks and testing work using the light gap method. Handle mm Angle tolerance mm 4623 Order No. € 35 x 13 x 60 0.007 248.50 …0010 (W410) Precision bevelled square, with sliding ruler Design: Bevelled square made of hardened, rustproof steel, rectangularity, parallelism and planarity tolerances. For maximum precision, chamfered bevelled edge on the inside of the long arm. Upright edges and flat sides accurately and precision ground, test surfaces ground. Angle 90°. Supplied in transport packaging. Application: For use in tool and fixture construction. Stock length mm Wide arm cross-section mm Narrow arm cross-section mm Angle tolerance mm 4625 Order No. € 25 x 20 6 x 3.5 5 x 3.5 0.003 21.00 …0250 40 x 28 8 x 3.5 5 x 3.5 0.003 21.00 …0400 (W410) Precision die maker's square, stainless DIN 875/00 INOX Design: Bevelled square acc. DIN 875/00, hardened. Straight edge acc. DIN 874/00, normal steel, glare-free, burnished. Supplied in a wooden box. Application: For control purposes in tool construction and production. Design Set content 4627 Order No. € 5-piece 1 bevelled square, size 75 x 50 mm (Order No. 4621 0750) 1 die maker's square with inside measuring edge, size 25 x 20 mm, (Order no. 4625 0250) 1 die maker's square with inside measuring edge, size 40 x 28 mm (Order No. 4625 0400) 1 straight edge, length 100 mm 1 gauge block scribing tip 60 x 9 x 9 mm 216.50 …0050 (W410) Precision test set DIN 874/00 DIN 875/00 Angle brackets 4.5
RkJQdWJsaXNoZXIy NTg4MTI=