FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/61 Design: With precise point geometry, rolled. Robust design. Hole depth 5 x D. Note: The roll forged finish of the jobber drill prevents breaks in the joint. This makes it particularly suitable for robust drilling work – as a cost-effective alternative for handheld machines. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 10 – – – – – 15 – – – – – – – – – 1000 ∅ h8 mm Spiral length mm Total length mm STEEL < 700 N/mm2 f mm/rev PU 1000 Order No. € 1 33 56 0.016 10 0.45 …0100 1.5 45 70 0.05 10 0.45 …0150 2 56 85 0.05 10 0.45 …0200 2.5 62 95 0.063 10 0.52 …0250 3 66 100 0.08 10 0.63 …0300 3.1 69 106 0.08 10 0.75 …0310 3.2 69 106 0.1 10 0.75 …0320 3.3 69 106 0.1 10 0.75 …0330 3.5 73 112 0.1 10 0.75 …0350 4 78 119 0.1 10 1.01 …0400 4.1 78 119 0.1 10 1.18 …0410 4.2 78 119 0.1 10 1.18 …0420 4.5 82 126 0.1 10 1.18 …0450 5 87 132 0.1 10 1.55 …0500 5.1 87 132 0.125 10 1.68 …0510 5.2 87 132 0.125 10 1.68 …0520 5.5 91 139 0.125 10 1.68 …0550 5.8 91 139 0.125 10 1.94 …0580 ​ (W014) ∅ h8 mm Spiral length mm Total length mm STEEL < 700 N/mm2 f mm/rev PU 1000 Order No. € 6 91 139 0.125 10 1.94 …0600 6.5 97 148 0.16 10 2.06 …0650 6.8 102 156 0.16 10 2.15 …0680 7 102 156 0.16 10 2.15 …0700 7.5 102 156 0.16 10 2.39 …0750 8 109 165 0.16 10 2.56 …0800 8.5 109 165 0.2 10 2.86 …0850 9 115 175 0.2 10 3.06 …0900 9.5 115 175 0.2 10 3.40 …0950 10 121 184 0.2 10 4.11 …1000 10.2 121 184 0.2 10 4.66 …1020 10.5 121 184 0.2 10 4.66 …1050 11 128 195 0.2 10 5.15 …1100 11.5 128 195 0.2 10 5.65 …1150 12 134 205 0.2 10 6.35 …1200 12.5 134 205 0.2 10 6.95 …1250 13 134 205 0.25 10 7.35 …1300 ​ (W014) bright bright Spiral drill, with cylindrical shank, roll-formed, long HSS DIN 340 N 118° 25–30° bright Design: Bright surface, steam tempered from ∅ 2.5 mm, with precision ground point. Hole depth 10 x D. Note: Further dimensions available on request. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 22 20 – – – – 27 18 – 45 – – – – – – 1045 22 20 – – – – 27 18 – 45 – – – – – – 1046 ∅ h8 mm Spiral length mm Total length mm STEEL < 700 N/ mm2 f mm/rev PU 1045 1046 Order No. € € 1 3356 0.01610 3.64 8.55 …0100 1.5 45 70 0.05 10 2.57 6.00 …0150 2 56 85 0.05 10 1.78 4.03 …0200 ​ (W100) (W101) ∅ h8 mm Spiral length mm Total length mm STEEL < 700 N/ mm2 f mm/rev PU 1045 1046 Order No. € € 2.5 62 95 0.06310 1.80 4.36 …0250 3 66 100 0.08 10 1.89 4.39 …0300 3.1 69 106 0.08 10 2.41 5.45 …0310 ​ (W100) (W101) steam steam steam steam Spiral drill, with cylindrical shank, length HSS DIN 340 N 118° 25–30° 1046 steam 1045 steam Continued on next page Drill HSS/HSS-E 1.1

RkJQdWJsaXNoZXIy NTg4MTI=