Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 4/77 Design: With round, non-switchable magnetic base, locking screw for the swivel arm. Measuring device is clamped using a knurled nut. Dial gauge adapter Ø 8 mm. Supplied in transport packaging. Application: For clamping dial gauges and lever gauges, particularly suitable in constricted spaces. Note: You can find dial gauges from Ç 4/53. Projection mm Magnet ∅ mm Total height mm Holding force N Tripod ∅ mm Magnetic base thread 4424 Order No. € 190 40 130 400 10 M6 61.50 …0001 (W094) Small measuring stand Design: Low construction height, measuring instrument holder can be pivoted 360°, with star handle screws for secure clamping and locking. With two strong round magnets on the holding side for good, flat adhesion of the contact surface. Dial gauge adapter Ø 8 mm H7. Application: For clamping dial gauges, precision indicators, and lever gauges. Note: Delivery without dial gauge. You can find dial gauges from Ç 4/53. Projection mm Holding force N Dimensions mm High magnetic base mm 4295 Order No. € 35 180 73 x 38 x 46 11 67.00 …0045 (W423) Magnetic holder, with universal swivel and pivot arm Design: Low construction height, measuring instrument holder can be pivoted 360°, with star handle screws for secure clamping and locking. With prismatic magnetic base and additional adhesive surfaces on both longitudinal sides. Dial gauge adapter Ø 8 mm H7. Application: For clamping dial gauges, precision indicators, and lever gauges. Note: Delivery without dial gauge. You can find dial gauges from Ç 4/53. Projection mm Holding force N Dimensions mm High magnetic base mm 4297 Order No. € 35 180 72 x 37 x 59 26 116.00 …0059 (W423) Magnetic holder, with universal swivel and pivot arm, with prismatic magnetic base Measuring stands 4.4
RkJQdWJsaXNoZXIy NTg4MTI=