FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 4/52 Design: Connection thread to exchange measuring heads, self-centring measuring head with three measuring heads protruding from the right offset by 120°, measuring probe from 12 mm carbide reinforced. From 12 mm measuring probe to bottom of hole, from 40 mm measuring head made of aluminium to save weight, data output variable radio transmission, RS232, Digimatic and USB. Delivery: With dial gauge, in case. Application: For measuring through-holes, blind holes and spigots. Functions: On and automatic off switch, mm/inch switching, key lock set for zero position, re-zeroing after switching deleted (absolute system), reset (zeroing) possible at each position, pre-set function (setting a numerical value), ABS (switching from relative to absolute measurement). Note: Dial gauge (Order No. 4246), see Ç 4/57. Measurement range mm Set content 4168 Order No. € 6– 12 3 micrometers 6–8 mm, 8–10 mm and 10–12 mm 2 adjusting rings 8 mm, 10 mm 1 dial gauge 0.0005 mm C◊ …4070 12– 20 2 micrometers, 12–16 mm and 16–20 mm 1 adjusting ring 16 mm 1 dial gauge 0.0005 mm C◊ …4075 20– 50 4 micrometers 20–25 mm, 25–30 mm, 30–40 mm and 40–50 mm 2 adjusting rings, 25 mm and 40 mm 1 dial gauge 0.0005 mm C◊ …4080 50–100 4 micrometers 50–60 mm, 60–70 mm, 70–85 mm and 85–100 mm 2 adjusting rings, 60 mm and 85 mm 1 dial gauge 0.0005 mm C◊ …4085 ​ (W488) Inside measuring pistol set Application: To determine the largest internal chamfer or internal taper diameter. Scope of delivery: Internal chamfer measuring instrument 90° with special dial gauge, reading 0.01 mm and taper angle. Measurement range mm 4321 Order No. € 0.5–20 C◊ …0020 20 –40 C◊ …0040 ​ (W419) Internal chamfer measuring instrument, IFM 4321 0020 4321 0040 Chamfer measuring instrument Made of chrome-plated special steel, for verification of chamfers on workpieces, with 30°, 45° and 60°. The attachment side is adjustable, with locking screw for dimension rail and attachment side; can be found on Ç 4/131. Internal dial gauges 4.3

RkJQdWJsaXNoZXIy NTg4MTI=