Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 4/41 Design: Matt chrome-plated operating and reading parts, steel bracket, spindle and anvil with mounting bore for exchangeable measuring inserts, hardened and ground, steel ball in bottom of hole for the installation of measurement inserts, anvil adjustable, measuring force regulation through ratchet stop, with clamping device. Supplied with 6 pairs of measuring inserts, measuring range 25–50 mm with setting measurement, in a case. Application: For measuring flanges and outer diameters on external threads by means of exchangeable measurement inserts. Note: Setting measurements (Order No. 4154), Ç 4/42. Measurement range mm for thread pitch mm Reading mm Spindle ∅ mm Drum Ø mm 4301 Order No. € 0–25 0.4–7 0.01 6.5 19 450.00 …0025 25–50 0.4–7 0.01 6.5 19 468.50 …0050 (W416) Micrometer set, for thread measurement with exchangeable inserts DIN 863-3 Design: Rustproof measuring spindle, hardened and ground, carbide-reinforced measuring spindle and anvil, mounting hole for measuring inserts with Ø 3.5 mm shaft, lacquered steel bracket, advance ratchet stop, QUICK DRIVE quick adjustment (5 mm per rotation) and hand thermal protection. Digit height on LCD display 10 mm, protected in acc. with IP65, data transfer via integrated radio system. Supplied with battery CR2032, 3 V, in case. Functions: On and automatic off switch, mm/inch switching, automatic switching by means of turning the drum, key lock set for zero position, no re-zeroing after switching on (absolute system), ABS (switching from relative to absolute measurement), TOL (tolerance and warning limit input) reset (zeroing) possible at each position. Note: Setting measurements (Order No. 4154), Ç 4/42. Radio receiver (Order No. 4246 0195) Ç 4/19. Thread flank inserts (cross groove, taper, cutting edge shape), ball and roller inserts as well as flat inserts can be supplied on request. Measurement range mm Reading mm Spindle ∅ mm Gradient mm Drum Ø mm 4332 Order No. € 0– 25 0.001 6.5 5 25 811.00 …0025 25– 50 0.001 6.5 5 25 1005.00 …0050 50– 75 0.001 6.5 5 25 1030.00 …0075 75–100 0.001 6.5 5 25 1076.00 …0100 (W488) Digital outside micrometer, for thread measurement with INTEGRATED WIRELESS DIN 863-3 INOX IP65 Design: Supplied with 6 pairs of measuring inserts and battery CR2032, 3 V, in case. Note: Setting measurements (Order No. 4154), Ç 4/42. Radio receiver (Order No. 4246 0195) Ç 4/19. Measurement range mm Set content 4332 Order No. € 0–25 1 outside micrometer, 0–25 mm 6 pairs of measuring inserts C◊ …0001 (W488) Digital outside micrometer, set with INTEGRATED WIRELESS Outside micrometers 4.2
RkJQdWJsaXNoZXIy NTg4MTI=