Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 4/39 Design: Matt chrome-plated operating and reading parts, hard-lacquered steel bracket, hardened and ground spindle, carbide reinforced, quick drive, measuring force regulation through ratchet stop, with clamping device. Available from measuring range 25–50 mm with dimension adjustment, in case. Application: For measuring grooves, splined shafts, recesses, etc. Measurement range mm Reading mm Spindle ∅ mm Drum Ø mm 4288 Order No. € 0–25 0.01 2 17.5 150.00 …0025 25–50 0.01 2 17.5 162.50 …0050 (W405) Outside spline micrometer DIN 863-3 Design: Rustproof measuring spindle, hardened and ground, carbide-reinforced measuring spindle and anvil, lacquered steel bracket, advance ratchet stop, quick drive and hand thermal protection. Digit height on LCD display 10 mm, protected in acc. with IP65, data transfer via integrated radio system. Supplied with battery CR2032, 3 V, in case. Functions: On and automatic off switch, mm/inch switching, automatic switching by means of turning the drum, key lock set for zero position, no re-zeroing after switching on (absolute system), ABS (switching from relative to absolute measurement), TOL (tolerance and warning limit input) reset (zeroing) possible at each position. Note: Radio receiver (Order No. 4246 0195) Ç 4/19. Measurement range mm Reading mm Spindle ∅ mm Drum Ø mm 4329 Order No. € 0–25 0.001 3 21 767.50 …0025 25–50 0.001 3 21 820.50 …0050 (W488) Digital outside micrometer with stepped measuring surface, with INTEGRATED WIRELESS DIN 863-3 INOX IP65 Design: Matt chrome-plated reading parts, hardened steel measuring surfaces, measuring force regulation by means of ratchet stop, with non-rotating spindle and hand thermal insulation. Supplied with adjustment key, from measuring range 25–50 mm with setting measurement, in a plastic case. Application: For measuring outer grooves. Measurement range mm Reading mm Spindle ∅ mm Gradient mm Drum Ø mm Measuring face mm 4119 Order No. € 0– 25 0.01 6.5 0.5 18 0.75 x 6 303.50 …0025 25– 50 0.01 6.5 0.5 18 0.75 x 6 342.50 …0050 50– 75 0.01 6.5 0.5 18 0.75 x 6 347.00 …0075 75–100 0.01 6.5 0.5 18 0.75 x 6 381.50 …0100 (W416) Outside micrometer, for outer grooves Design: Rustproof measuring spindle, hardened and ground, carbide-reinforced measuring spindle and anvil, lacquered steel bracket, advance ratchet stop, QUICK DRIVE quick adjustment (5 mm per rotation) and hand thermal protection. Digit height on LCD display 10 mm, protected in acc. with IP65, data transfer via integrated radio system. Supplied with battery CR2032, 3 V, in case. Functions: On and automatic off switch, mm/inch switching, automatic switching by means of turning the drum, key lock set for zero position, no re-zeroing after switching on (absolute system), ABS (switching from relative to absolute measurement), TOL (tolerance and warning limit input) reset (zeroing) possible at each position. Note: Radio receiver (Order No. 4246 0195) Ç 4/19. Measurement range mm Reading mm Spindle ∅ mm Gradient mm Drum Ø mm Measuring face mm 4331 Order No. € 0– 25 0.001 6.5 5 25 0.8 x 7 808.00 …0025 25– 50 0.001 6.5 5 25 0.8 x 7 1005.00 …0050 50– 75 0.001 6.5 5 25 0.8 x 7 1030.00 …0075 75–100 0.001 6.5 5 25 0.8 x 7 1076.00 …0100 (W488) Digital outside micrometer, for outer grooves with INTEGRATED WIRELESS DIN 863-3 INOX IP65 Outside micrometers 4.2
RkJQdWJsaXNoZXIy NTg4MTI=