Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 4/37 Design: Measuring spindle hardened and ground, lacquered steel bracket, advance ratchet stop, with quick drive and hand thermal protection. Digit height on LCD display 10 mm, protected in acc. with IP65. Supplied with battery CR2032, 3 V, in case. Functions: On and automatic off switch, mm/inch switching, automatic switching by means of turning the drum, key lock set for zero position, no re-zeroing after switching on (absolute system), ABS (switching from relative to absolute measurement), reset (zeroing) possible at each position, pre-set function (setting a numerical value). Measurement range mm Reading mm Spindle ∅ mm Gradient mm 4111 Order No. € 0– 25 0.001 6.5 0.5 248.50 …3025 25– 50 0.001 6.5 0.5 344.00 …3050 50– 75 0.001 6.5 0.5 415.00 …3075 75–100 0.001 6.5 0.5 470.00 …3100 (W488) Digital outside micrometer, IP65 INOX IP65 Design: Measuring spindle hardened and ground, measuring faces carbide-tipped, measuring force regulation by means of ratchet stop. With hand thermal protection. Supplied with battery CR2032, 3 V, in case. Functions: On and automatic off switch, mm/inch switching, no re-zeroing after switching on (absolute system), reset (zeroing) possible at each position. Measurement range mm Reading mm Spindle ∅ mm Gradient mm 4282 4111 Order No. € € 0– 25 0.001 6.5 0.635 198.00 – …0025 0– 25 0.001 6.5 0.5 – 318.00 …4025 25– 50 0.001 6.5 0.635 227.50 – …0050 25– 50 0.001 6.5 0.5 – 377.50 …4050 50– 75 0.001 6.5 0.635 256.50 – …0075 50– 75 0.001 6.5 0.5 – 497.00 …4075 75–100 0.001 6.5 0.635 285.00 – …0100 75–100 0.001 6.5 0.5 – 549.00 …4100 100–125 0.001 6.5 0.635 333.50 – …0125 100–125 0.001 6.5 0.5 – 714.50 …4125 125–150 0.001 6.5 0.635 383.50 – …0150 125–150 0.001 6.5 0.5 – 742.50 …4150 150–175 0.001 6.5 0.5 – 770.50 …4175 175–200 0.001 6.5 0.5 – 786.00 …4200 (W405) (W488) Digital outside micrometer, IP65, data output DIN 863-1 IP65 4282 With clamping lever. Digit height on LCD display 7 mm, with data output USB. Note: Data cable (Order No. 4282 0013) Ç 4/18. Wireless set (Order No. 4282 0026) Ç 4/18. 4111 Digit height on LCD display 10 mm, with rapid drive, automatic switching by means of turning the drum, data output opto RS232, Digimatic and USB. TOL (tolerance and warning limit input), ABS (switching from relative to absolute measurement), reset (zeroing) possible at each position, pre-set function (setting a numerical value). Note: Data cable (Order No. 4000), see Ç 4/18. 4282 Design: Supplied with adjusting dimensions. Measurement range mm Content mm 4282 4111 Order No. € € 0–100 0–25; 25–50; 50–75; 75–100 – 1711.00 …0000 0–100 0–25; 25–50; 50–75; 75–100 1133.00 – …0001 (W405) (W488) Digital outside micrometer set, IP65, data output 4282 In wooden box. 4111 In plastic case. 4282 0001 4111 Outside micrometers 4.2
RkJQdWJsaXNoZXIy NTg4MTI=