FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 4/31 Design: Hardened, measuring faces precision ground and hardened, with locking screw. Supplied with battery CR2032, 3 V. Functions: Automatic off switch, mm/inch switching, key lock set for zero position, no re-zeroing after switching (absolute system), reset (zeroing) possible at each position. Note: Data cable (Order No. 4025), see Ç 4/18. Measurement range mm Reading Bridge length mm Measuring bar cross-section mm 4093 4135 Order No. € € 300 0.01 mm (0.0005 inch) 150 12 x 4 – 164.00 …0300 300 0.01 mm (0.0005 inch) 150 12 x 4 526.00 – …5300 500 0.01 mm (0.0005 inch) 150 12 x 4 – 278.00 …0500 500 0.01 mm (0.0005 inch) 150 12 x 4 617.00 – …5500 ​ (W410) (W081) Digital depth gauge caliper, with stepped measuring rod INOX 4093 Digit height of the LCD display 7.5 mm, with data output RS232, USB and Digimatic (DATA Variable). Supplied in wooden case. Preset function (measurement value pre-setting). 4135 Digit height of the LCD display 8 mm, with data output opto RS232. Supplied in plastic case. 4135 DIN 862 IP54 4093 IP67 Design: Hardened, measuring faces precision ground and hardened, with locking screw, digit height of LCD display 6 mm, with data output opto RS232, USB and Digimatic. Supplied with battery CR2032, 3 V, in plastic case. Functions: Automatic off switch, mm/inch switching, no re-zeroing after switching on (absolute system), zeroing possible at each position. Measurement range mm Reading Bridge length mm Measuring bar cross-section mm 4066 Order No. € 300 0.01 mm (0.0005 inch) 150 12 x 4 176.50 …0300 ​ (W081) Digital depth gauge caliper, with double-sided stepped measuring rod DIN 862 INOX IP54 Design: With locking screw. Mount exchangeable, thread M2.5. Supplied with battery CR2032, 3 V. Application: For simple measurement of inside grooves. Note: Further measuring inserts from Ç 4/62. Measurement range mm Reading 4066 Order No. € 150 0.01 mm (0.0005 inch) 391.00 …0100 ​ (W404) Digital depth gauge caliper, with disc measuring anvil INOX Depth gauge calipers 4.1

RkJQdWJsaXNoZXIy NTg4MTI=