FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 4/13 Design: Hardened, measuring faces precision ground, with locking screw. Supplied with battery CR2032, 3 V, in plastic case. Functions: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, key lock set for zero position, no re-zeroing after switching (absolute system), reset (zeroing) possible at each position. Application: For inside, outside, depth and step measurements. Measurement range mm Design Reading Jaw length mm 4023 4023 4141 Order No. € € € 150 with round depth gauge 0.01 mm (0.0005 inch) 40 164.00 – – …1150 150 with round depth gauge 0.01 mm (0.0005 inch) 40 – 203.50 * – …1400 150 with rectangular depth gauge 0.01 mm (0.0005 inch) 40 164.00 – – …1151 150 with rectangular depth gauge 0.01 mm (0.0005 inch) 40 – 203.50 – …1401 150 with rectangular depth gauge 0.01 mm (0.0005 inch) 40 – – 128.50 …0150 200 with rectangular depth gauge 0.01 mm (0.0005 inch) 50 245.00 – – …1200 200 with rectangular depth gauge 0.01 mm (0.0005 inch) 50 – 288.00 – …1410 300 without depth gauge 0.01 mm (0.0005 inch) 65 316.00 – – …1300 300 without depth gauge 0.01 mm (0.0005 inch) 64 – 389.00 – …1411 ​ (W404) (W488) (W081) Digital pocket caliper, IP67 * Factory standard. DIN 862 INOX IP67 5 4023 1150 – 1300 Digit height on LCD display 8.5 mm. 4023 1400 – 1411 Lapped guideway, digit height of LCD display 11 mm, heightened guideway to protect the scale, dirt wiper in slide. Additionally with preset function (measurement value pre-setting) and count direction reversal. 4141 Digit height on LCD display 11 mm. 4141 4023 4023 Design: Hardened, lapped guideway, with locking screw. Digit height of LCD display 8.5 mm, heightened guideway to protect the scale, dirt wiper in slide, data output variable RS232, Digimatic and USB. Supplied with battery CR2032, 3 V, in plastic case. Functions: Automatic switching by means of slider movement, mm/inch switching, key lock set for zero position, no re-zeroing after switching (absolute system), reset (zeroing) possible at each position. Application: For inside, outside, depth and step measurements. Note: Replacement battery (Order No. 4026 2032) Ç 4/21. Data cable (Order No. 4246), see Ç 4/19. Measurement range mm Design Reading Jaw length mm 4023 Order No. € 150 with round depth gauge 0.01 mm (0.0005 inch) 40 267.50 …1402 150 with rectangular depth gauge 0.01 mm (0.0005 inch) 40 267.50 …1403 200 with rectangular depth gauge 0.01 mm (0.0005 inch) 50 312.00 …1404 300 without depth gauge 0.01 mm (0.0005 inch) 64 413.00 …1405 ​ (W488) Digital pocket caliper, IP67, data output Measuring range 300 mm according. factory standard. DIN 862 INOX IP67 5 Pocket calipers 4.1

RkJQdWJsaXNoZXIy NTg4MTI=