FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 4/11 Design: Made of solid brass. Readings in mm and English inches. Measurement range mm Design Reading below mm Jaw length mm 4182 Order No. € 80 Standard jaw 0.1 25 10.00 …0008 100 Standard jaw 0.1 25 10.65 …0010 80 Nib jaw 0.1 20 8.60 …0080 100 Nib jaw 0.1 20 9.00 …0100 ​ (W080) Slide 4182 0010 4182 0080 Design: Hardened, matt chrome-plated reading parts, covered toothed rack, measuring faces precision ground, with roller fine adjustment and locking screw. Supplied in an artificial leather case. Application: For inside, outside, depth and step measurements. Measurement range mm Reading mm Pointer revolution mm Jaw length mm 4013 4015 Order No. € € 150 0.02 2 40 51.50 108.50 …2151 150 0.01 1 40 57.40 133.50 …2150 ​ (W401) (W488) Dial caliper DIN 862 INOX 4015 4013 ​ Design: Hardened, measuring faces precision ground, with locking screw. Supplied with battery CR2032, 3 V, in plastic case. Functions: mm/inch-switching, reset (zero setting) possible in any position. Application: For inside, outside, depth and step measurements. Measurement range mm Design Reading Jaw length mm 4020 4020 4089 Order No. € € € 150 with round depth gauge 0.01 mm (0.0005 inch) 40 124.00 – – …1150 150 with round depth gauge 0.01 mm (0.0005 inch) 40 – 137.00 – …1310 150 with rectangular depth gauge 0.01 mm (0.0005 inch) 40 – – 70.90 …0150 150 with rectangular depth gauge 0.01 mm (0.0005 inch) 40 124.00 – – …1151 150 with rectangular depth gauge 0.01 mm (0.0005 inch) 40 – 137.00 – …1320 200 with rectangular depth gauge 0.01 mm (0.0005 inch) 50 – – 112.50 …0200 300 without depth gauge 0.01 mm (0.0005 inch) 64 – 314.00 * – …1360 300 with rectangular depth gauge 0.01 mm (0.0005 inch) 64 – – 148.50 …0300 ​ (W404) (W488) (W081) Digital pocket caliper * Factory standard. DIN 862 INOX 5 4020 1150 + 1151 Digit height on LCD display 7.5 mm. Automatic switching by means of slider movement, key lock set for zero position, no re-zeroing after switching (absolute system). 4020 1310 – 1360 Lapped guideway, digit height of the LCD display 11 mm. Automatic switching by means of slider movement, key lock set for zero position, no re-zeroing after switching (absolute system). 4089 Digit height on LCD display 11 mm. 4089 4020 4020 The absolute system • The measuring tool is always ready to measure • The zero position stays locked for other measurements after setting once • No zeroing after switching Pocket calipers 4.1

RkJQdWJsaXNoZXIy NTg4MTI=