Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/203 Design: Made of hard ferrite, surface galvanised and shielded, with threaded bushing. The recommended operating temperature is max. 80 °C. Application: For easy installation in jigs. Installation is done by screwing on. ∅ d mm Overall height I mm Magnet height h mm Bushing ∅ d1 mm Thread Holding force N Weight g 3975 Order No. € 6 11.5 4.5 6 M3 5 2 2.64 …0045 8 11.5 4.5 6 M3 13 3 2.73 …0050 10 11.5 4.5 6 M3 25 4 3.10 …0055 13 11.5 4.5 6 M3 60 5 3.82 …0060 16 11.5 4.5 6 M4 95 7 4.62 …0065 20 13 6 8 M4 140 16 7.00 …0070 25 14 7 8 M4 200 27 10.30 …0075 32 15.5 7 10 M5 350 45 14.80 …0080 (W352) Neodymium magnetic flat grippers, with threaded bushing Design: Made of hard ferrite, surface galvanised and shielded, with threaded bushing. The recommended operating temperature is max. 100 °C. Application: For easy installation in jigs. Installation is carried out by gluing in or press fitting. ∅ d mm Magnet height h mm Holding force N Weight g 3976 Order No. € 10 4.5 4 2 1.46 …0010 13 4.5 10 3 1.74 …0013 16 4.5 18 5 1.98 …0016 20 6 30 10 2.38 …0020 25 7 40 18 2.52 …0025 32 7 80 29 3.15 …0032 40 8 125 55 3.99 …0040 (W352) Magnetic flat grippers, without threaded bushing Design: Made of neodymium, surface galvanised and shielded, with threaded bushing. The recommended operating temperature is max. 80 °C. Application: For easy installation in jigs. Installation is carried out by gluing in or press fitting. ∅ d mm Magnet height h mm Holding force N Weight g 3976 Order No. € 6 4.5 5 1 2.37 …0050 8 4.5 13 2 2.49 …0055 10 4.5 25 2.5 2.73 …0060 13 4.5 60 4 3.50 …0065 16 4.5 95 6 4.17 …0070 20 6 140 14 6.35 …0075 25 7 200 25 9.20 …0080 32 7 350 40 13.65 …0085 (W352) Neodymium magnetic flat grippers, without threaded bushing Design: Made of neodymium, surface galvanised and shielded, with through hole and 90° countersinking. The recommended operating temperature is max. 80 °C. Application: For easy installation in jigs. Installation is carried out by gluing in or press fitting. ∅ d mm Magnet height h mm Hole ∅ d1 mm Countersink ∅ d2 mm Holding force N Weight g 3976 Order No. € 16 4.5 3.5 6.6 75 6 3.96 …0090 20 6 4.5 9.3 105 13 5.30 …0095 25 7 4.5 9 160 24 7.10 …0100 32 7 5.5 11 310 39 11.05 …0105 40 8 5.5 10.3 500 73 15.95 …0110 (W352) Neodymium magnetic flat grippers, with through hole and countersinking 2 90° Magnetic clamping devices 3.89
RkJQdWJsaXNoZXIy NTg4MTI=