FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 3/166 Design: All parts tempered, strength grades 8 or 10. The folding lid can be removed so that the box can be stored open in the tool cabinet. T-slots M12 x 12 M12 x 14 M14 x 16 M16 x 18 M18 x 20 M20 x 22 T-slot bolt mm 2 x 50 4 x 80 4 x 125 2 x 50 4 x 80 2 x 63 4 x 100 2 x 63 4 x 100 ** – – 2 x 80 4 x 125 Stud bolt mm 4 x 63 4 x 100 4 x 200 4 x 63 4 x 100 4 x 125 4 x 200 4 x 63 4 x 100 4 x 160 4 x 250 4 x 80 4 x 125 4 x 160 4 x 250 6 x 80 8 x 125 4 x 200 4 x 315 4 x 80 4 x 125 4 x 200 4 x 315 Nut for T-slot * 4 x 4 x 4 x 10 x 4 x Hexagon nut 4 x 4 x 4 x 4 x 4 x 4 x Extension nut 4 x 4 x 4 x 4 x 4 x 4 x Spherical washer 4 x 4 x 4 x 4 x – 4 x Conical seat 4 x 4 x 4 x 4 x – 4 x Washer 4 x 4 x 4 x 4 x 10 x 4 x Dimension L x W x H mm 278 x 234 x 36 278 x 234 x 36 317 x 239 x 44 339 x 294 x 48 359 x 342 x 56 358 x 342 x 56 3995 € 187.00 187.50 226.00 256.50 346.50 388.50 (W342) Order No. …0010 …0020 …0025 …0030 …0035 …0040 Clamping bolt set, for T-slots * Nuts for T-slots DIN 508 cannot be used for these sizes. ** Instead of DIN 787, M18 x 20 additionally contains 4 studs DIN 6379, 125 mm and 2 pieces 80 mm, each with nuts for T-slots DIN 508 and washers DIN 6340. Design: Made of tempered steel. These assortment boxes contain all necessary elements for rapid clamping tools, jigs or workpieces on T-slot tables. All parts in accordance with DIN or factory standards are replaceable and can be supplemented at any time. The folding lid can be removed so that the box can be stored open in the tool cabinet. Scope of delivery: Wooden box with bolt paste. T-slots M10 x 10 M12 x 12 M12 x 14 M16 x 16 M16 x 18 M20 x 22 Universal clamping pads 4 x SZ 1 4 x SZ 2 2 x SZ 3 – 4 x SZ 2 4 x SZ 3 – 4 x SZ 2 4 x SZ 3 – 4 x SZ 2 4 x SZ 3 – 4 x SZ 2 4 x SZ 3 – 4 x SZ 2 4 x SZ 3 Clamps with steps 4 x 11/80 4 x 14/100 4 x 14/100 4 x 18/125 4 x 18/125 4 x 22/160 T-slot bolt mm 2 x 40 4 x 63 4 x 100 2 x 50 4 x 80 4 x 125 2 x 50 4 x 80 4 x 125 2 x 63 4 x 100 4 x 160 2 x 63 4 x 100 4 x 160 4 x 125 4 x 200 Stud bolt mm 4 x 80 4 x 100 4 x 100 4 x 125 4 x 125 4 x 125 Hexagon nut 6 x 6 x 6 x 6 x 6 x 6 x Extension nut 4 x 4 x 4 x 4 x 4 x 4 x Conical seat 6 x 6 x 6 x 6 x 6 x 6 x Deep clamping jaws 4 x SZ 12 4 x SZ 12 4 x SZ 14 4 x SZ 16 4 x SZ 18 * Slot reamers – – 1 x 14–20 1 x 14–20 1 x 14–20 1 x 22–32 Combination ring spanner 1 x A/F 16 1 x A/F 18 1 x A/F 18 1 x A/F 24 1 x A/F 24 1 x A/F 30 Dimension L x W x H mm 355 x 270 x 47 460 x 330 x 50 460 x 330 x 50 510 x 415 x 50 510 x 415 x 50 480 x 528 x 60 3996 € 488.50 555.00 578.50 751.00 761.50 751.00 (W342) Order No. …0010 …0020 …0030 …0040 …0050 …0070 Clamping tool assortment box The deep clamping jaws come complete with nuts for T-slots DIN 508, screws DIN 912 as well as two hexagon socket screw keys DIN 911. * M20 x 22 without deep clamping jaws. 4 spring-loaded clamp holders included. Clamping elements 3.8

RkJQdWJsaXNoZXIy NTg4MTI=